Clearview Infinity enclosure mod kit for Voron 2.4 and Trident 250, 300, 350mm

Size :
Model :
Addon 5kg Spool enclosure :

The Clearview Infinity mod for the Voron 2.4r2 and Trident is an upgraded enclosure system that offers both better performance with a commercial grade design aesthetic. (5kg Spool enclosure sold Separately)  The name "Clearview Infinity" correlates to the visual aesthetic of the transparent panels. 1/4" HD polycarbonate panels and oversized hardware are designed to take give this a commercial  grade fit and finish.  More so, the added function that this enclosure set adds is better heat retention for advanced printing, reduced noise while printing, and a strong sturdy enclosure that feels like a professional piece of lab equipment. All due respect to the Voron team for making an amazing printer, but we thought the enclosure portion needed some help.

1/4" Polycarbonate Panels - Our premium commercial grade panels are super durable and have a UV protective coating to resist fading and haze over time. These thicker panels will get you better heat retention and a finish that fits the performance level of Voron series. 

✅ Full sized front door - This gives you a full, unobstructed view of your work surface without the unsightly seam of the original dual door design. Additionally, our panels are CNC cut for a butter smooth edge that adds a professional fit and finish to your Voron.

Exhaust delete - Most users are printing with advanced materials like ABS or better. The BOM exhaust often remains unused and and in the way so we removed this and added in a low profile grommet to pass through your bowden tube and any other wires for mods that you are running.

Faq and other information:


  1. The Clearview Infinity includes panels, printed parts, and hardware for performing this upgrade. This kit replaces the top, rear, sides, and front panel. (You'll use your existing base panels) The oversized flanged hardware offers a better air seal along the framing and is easy to attach using drop in T slot nuts.
  2. Installing this mod is a easy bolt on process and requires no hard modding or fabrication. Just bolt it on and you are up and printing. Do keep in mind that it might be a good time to check for loose fitting and lube up critical parts since you'll have your printer open at this time.
  3. Those looking to reduce fumes from filaments like ABS should look into the nevermore filter. However, we can ship this with an exhaust port on the back panel that connects to a 4" hose if that is desired.
  4. LOOKOUT!! Our panels are better! Stock panels are blade cut panels, so your edge finish is sub par. We CNC cut our panels so your panels come with a professional look and finish. CNC cut panels, crafted in the USA. Other listings are saw cut panels which leave blade marks so your panels won't look as good. Ours are professionally cut for the best look.

What is included (BOM)

  • 5 Polycarbonate panels (5.5mm or 6mm) (Front, sides, rear, and top)
  • 52 m5 x10mm flanged screws
  • 52 m5 half round extrusion nuts
  • 16 m4 x10mm flanged screws
  • 12 m4 Rivet nuts
  • 4 5mm x 10mmx 5mm magnets
  • 1 - 256mm pull handle 
  • 1 press fit bowden holder
  • 1/4" wide weather seal

Printed parts

  • 3 - 270 degree hinges
  • 2 - Magnetic brackets
  • 1 - combination rubber grommet

Open Source mode:

We want to offer a way to open source this mod for those who DIY. At the same time, we build these enclosures to make a living and we put a lot of work into the design, function, and finish of the enclosures we make. That said, we will give you alternative open source parts that you can use to complete your own Clearview Infinity. In the spirit of being a maker, we'll happy to share our idea and the work it takes to make a great product. :)

  • Panel 1 Front 421mm wide x 435.5mm tall
  • Panel 2 + 3 Sides 410mm wide x 430mm tall
  • Panel 4 Rear 421mm wide x 430mm tall
  • Panel 5 Top 421mm wide x 415.5 deep
  • Hinges
  • 1/4" Gasket Material


Funny Story

In developing a brand it is always a tall challenge to not only create a great product, but also great media and marketing to accompany that. It is however fun to develop the name for product names especially if you can come up with something cheeky. The original mod was called the "Blast bucket" to describe the burly build of this enclosure. After sleeping on it, the next morning while sitting in the bathroom I discovered that Blast Bucket is way to synonymous to taking a #2.  Sometimes you win, sometimes you don't.🤷‍♂️  -Neil




The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
You have successfully subscribed!
This email has been registered