ATEZR Laser Enclosure Kit - V and P series Universal Fit

$365.00
$365.00

The ATEZR Voyager and Pioneer series laser engraver enclosure is a highly functioning enclosure for a high functioning laser.  This enclosure is a "set over" table top design and securely holds your laser inside for easy setup and mobility. This enclosure is derived from our universal fit enclosure line and is sized to fit the Atezr voyager an other similar laser engravers.

Panels are made from clear or optional laser filtering acrylic for a clean easy to see work area. Best of all, we have designed a solution that is compatible with the rotary tool allowing you to engrave cups and tumbles up 80mm in diameter without the need to move or prop up your laser enclosure.  Our enclosure sets up easily with just a screw driver and doesn't require significant modification. Lastly our enclosure is safer. We have the only enclosure with panels that are spectrometer tested to block up to 99.8% of light transmission at the 450nm wavelength. The dimensions of this enclosure are  750mm Wide x 755mm Deep x 405mm tall and will fit any other laser engraver that will fit inside those dimensions.

  

Clearview enclosures are made in California, by a small business that understands the needs of crafters and carries genuine appreciation for your support. The following data is from our Xtool enclosure which will carry a similar fit and finish to the ATEZR enclosure

  • Universal Fit - 750mm Wide x 755mm Deep x 405mm tall and will fit the ATEZR K1.
  • Commercial grade - 1/4" panels are thicker and more stable for a stronger enclosure.
  • Hood mounted Lightburn camera - USB camera that is mounted to the hood of the enclosure to get accurate part alignment with Lightburn tracing.
  • Air assist compatible - 2 access points for feeding wires and air assist tubing
  • 4" exhaust options
  • Extendable - Extend your enclosure by simply adding a 2nd enclosure. We designed this to work so it is easy to extend.
  • Expandable - You can also change the side that you want your exhaust vent on to fit your work space best. Or, add on a second fan for added exhaust capacity. 


DOWNLOAD FILES AND ASSEBMLY INSTRUCTIONS HERE

 



✅GENEROUS DIMENSIONS of 750mm Wide x 755mm Deep x 405mm tall

✅COMMERCIAL GRADE PANELS - 1/4" (6mm) are standard and carry a weight and feel of a professional piece of lab equipment.

✅EASY SETUP - Your Laser doesn't need any part replacement modifications to set up. You only need a screw Phillips Screw driver and Allen key to assemble.
✅DUAL ACCESS DOORS - Access is easy with magnetically latched front and top mounted access doors.
✅EXHUAST PORT - A 4" mount connects easily to a drier line to remove smoke and fumes. We have a USB fan, but do understand that the USB fan has limits and we encourage you to set up a larger inline vent fan if you are burning heavy loads.
✅PASS THROUGH PORTS - 18" ports on the front and allow you to feed and tile jobs that are larger than the laser's print area.
✅LASER FILTERING PANELS - Optional Laser Filtering panels can be upgraded to partial or full amber panels (OD3+ filtering at wavelengths up to 520nm). This option is great to reduce indirect light transmission. Do understand this is not classified as "Laser Viewing". In other words, you still need to wear the appropriate safety glasses. If you need panels that comply with OSHA or ANSI standards, please contact us directly.

✅OPTIONAL DUAL CHANNEL USB LED LIGHTING KIT - This plug and play lighting kit uses premium aluminum extrusion that is easy to mount with preinstalled adhesive and fool proof setup with simple male/female DC adaptor cords. At just 5 volts, these lights are bright enough to light up your project, yet super efficient.

 

 

 Here is why you want an enclosure...
This enclosure is an absolute must for a laser engraver. The companies are selling their laser engravers without enclosures because it is a difficult, expensive addon. Laser engraving produces lots of smoke, soot and fumes that you don't want to breath in. More so, if you are engraving into paint, wood with stain or sealants, or other substrates you are producing smoke that you don't want to breath in. Even leather and non treated wood contain stuff you don't want to breath in regularly. An enclosure is designed to contain the smoke and soot and more so, adding an exhaust port is the best way to contain the fumes. If you are planning to engrave indoors, this is a necessary upgrade.


 

Here is what to expect...

Our Xtool D1 enclosure is tailor fit specifically for the D1.  Our panels are cnc cut for precision sizing, the 3D printed brackets have carry great fitment, and the hardware we provide protects against rust. This enclosure while in use contains a significant portion of fumes and smoke when accompanied by a proper exhaust setup. Do expect that the laser produces a soot that will collect on your laser and enclosure over time so cleaning will be needed as desired. The thinner panels are pretty flexible and we offer them to make them affordable. We do strongly suggest getting the thicker panels as your first choice for a more robust, professional feel.

 This is what makes our enclosure rad:

We offer special features that are found on professional grade lasers. The amber colored, laser filtering acrylics greatly reduce the light flashing into the room for a better operating experience.  Assembling is easy and only requires a screw driver and allen wrench. The panels are sized perfectly to fit just around the frame and with enough height to accommodate the rotary and extension.  Ports at the base allow your to easily slide your sheet substrate in the enclosure for fast material changes and so you can tile jobs to create a job with an infinite length.

Here are some details:


  • AIR ASSIST COMPATIBLE- Add your air assist setup easily by guiding the tube through the back or side ports on the bottom.


Who We've Worked With

3d printer enclosures for business, education, universities.


 

About Clearview:

Neil Henderson here, Owner and Head Designer at Clearview Plastics. My shop is a California based artisan design studio that builds our enclosures in house, in Sacramento California. My enclosure are professionally CNC cut for accuracy with parts specifically designed for our artisan project. This isn't ordering from Amazon. When you order through us, you with with me, and out relationship comes with my genuine appreciation and personal skilled help.




~~Q&A updates~~

Do the laser filtering panels mean I don't need to wear those amazingly rad safety glasses?

No, While the panels filter UV light at the wavelength that diode lasers operate at, we still suggest you wear those sexy safety glasses.

What is or is not included?

Generally speaking, if you pick the minimum price kit it include acrylic panels and hardware, and you 3D print the brackets and parts. If you choose to include 3Dprinted parts you will have everything you need to set up the enclosure, but you'll need to add your own exhaust fan and hose. We consider this a complete operating kit and the remaining customizations are optional. In all cases you will need to supply a 4" dryer hose to exhaust fumes to the window.

Will your XTool enclosure allow enough vertical space to use the rotary too also?

Yes! The inside height of the enclosure is 11.75" With feet attached and laser head fully articulated up there is just enough room. We also developed an easy to attach  wire lead that helps prevent the laser head wires from bushing on the enclosure lid. In all, this should give enough clearance for engraving onto an 80mm glass or tumbler. 

Do you Ship internationally?

Yes. The shipping costs are automatically calculated at checkout. We ship using USPS/UPS/Fedex with an HS code of 8538.10. Shipping prices with express shipping services often cover import fees and bonds however additional fees, VAT, and other tariffs maybe charged. 

What is your timeline?

 

We are shipping Preorder by January 15th or sooner. 

Do the Laser filtering panels allow me to stare at the laser?

No. Independent testing shows the laser filtering panels block wavelengths up to 520nm (desktop Diodes operate at 445nm). However, it is never safe to look directly at the laser. Proper eye protection should be worn when you laser is in use. If you need and enclosure that meets ANSI, ASTM, or OSHA guidelines please contact us.

Does the enclosure have an exhaust port to clear smoke and fumes?

Our enclosure includes a USB powered Fan and is great way to keep the smoke and smell contained. The powered fan that is included will help a hobbyist reduce the fumes when you use a 4 inch exhaust hose outside. The USB fan is designed for casual hobby use. If you are burning large jobs or sensitive materials you may need to add an inline vent fan to your exhaust for more air circulation. You will need to supply 4" dryer hose. It is availble at most hardware store or amazon for about $10

Do you Make an enclosure for other models than just XTool?

Yes, we offer a universal option that is compatible with other laser engravers with an approximate 40cmx40cm engraving space here

Have a different laser engraver or desktop CNC? We make enclosures for several printer models. Just ask!

What is your return Policy?

We have a 30 day return policy. Unused, undamaged panels that still have the masking fully attached are eligible for a full refund less return shipping. If panels are damaged (after shipment) or the protective mask layer has been removed, we cannot offer a refund. For best results in ensuring fitment and to ensure you like the setup of our enclosures consider at least partially assembling with the mask on. If you find out it isn't for you, this allows to get the return for a full refund.

 

What are some other things I should know?

This listing is for the Clear acrylic panels, hardware, and printed parts to enclose your Xtool D1 Laser Engraver. Laser engraver not included.
"I still smell smoke" - A few things 1. The enclosure is designed to catch most of the fumes, but it is not sealed. You may wish to create your own mods for better sealing. 2. You may need more exhaust power or efficiency. Consider upgrading your fan to an inline fan or a fan with additional power.
We make updates and upgrades to our enclosures often. The brackets, placement, descriptions, and photos can change. Sorry, but if we've outdated a piece or feature we cannot roll that back for you.

RETURNS

----

Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.

To be eligible for a return, your item must be unused and in the same condition that you received it. Enclosure panels must have protective mask intact. It must also be in the original packaging.

Several types of goods are exempt from being returned. Perishable goods such as food, flowers, newspapers or magazines cannot be returned. We also do not accept products that are intimate or sanitary goods, hazardous materials, or flammable liquids or gases.

Additional non-returnable items:

* Gift cards

* Downloadable software products

* Some health and personal care items

To complete your return, we require a receipt or proof of purchase.

Please do not send your purchase back to the manufacturer.

There are certain situations where only partial refunds are granted: (if applicable)

* Book with obvious signs of use

* CD, DVD, VHS tape, software, video game, cassette tape, or vinyl record that has been opened.

* Any item not in its original condition, is damaged or missing parts for reasons not due to our error.

* Any item that is returned more than 30 days after delivery

Refunds (if applicable)

Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.

If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.

Late or missing refunds (if applicable)

If you haven’t received a refund yet, first check your bank account again.

Then contact your credit card company, it may take some time before your refund is officially posted.

Next contact your bank. There is often some processing time before a refund is posted.

If you’ve done all of this and you still have not received your refund yet, please contact us at contact@clearviewplastic.com.

Sale items (if applicable)

Only regular priced items may be refunded, unfortunately sale items cannot be refunded.

Exchanges (if applicable)

We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at contact@clearviewplastic.com and send your item to: 4235 Pacific St Ste H, Rocklin, CA, 95677, United States.

Gifts

If the item was marked as a gift when purchased and shipped directly to you, you’ll receive a gift credit for the value of your return. Once the returned item is received, a gift certificate will be mailed to you.

If the item wasn’t marked as a gift when purchased, or the gift giver had the order shipped to themselves to give to you later, we will send a refund to the gift giver and he will find out about your return.

Shipping

To return your product, you should mail your product to: 4235 Pacific St Ste H, Rocklin, CA, 95677, United States.

You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.

Depending on where you live, the time it may take for your exchanged product to reach you, may vary.

If you are shipping an item over $75, you should consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
You have successfully subscribed!
This email has been registered