{"product_id":"atomstack-a20-pro-ir-fiber-laser-engraver-enclosure-universal-fit","title":"Atomstack A20 Pro IR Fiber Laser Engraver Enclosure - Universal Fit","description":"\u003cp\u003eThe \u003cstrong\u003eAtomstack A20 Pro IR Fiber Laser Engraver Enclosure\u003c\/strong\u003e by Clearview Plastics is a made-to-fit safety and ventilation upgrade built specifically for the \u003cstrong\u003eAtomstack A20 Pro\u003c\/strong\u003e — the 400 × 400 mm open-frame 1064 nm fiber engraver. Because it runs a 1064 nm infrared head, it needs more than a diode box: this enclosure surrounds the A20 Pro with aluminum-lined composite panels that absorb stray beams and a 1064 nm-rated viewing window, plus full fume and soot control.\u003c\/p\u003e\n\u003cp\u003eYour A20 Pro drops right into the enclosure's \u003cstrong\u003e750 x 755 x 405 mm (29.5\" x 29.75\" x 16\") external footprint\u003c\/strong\u003e — roughly 740 x 745 mm inside the frame, with about 400 mm (15.75\") of height for the gantry, the rotary, and a tumbler. The A20 Pro's frame fits inside the IR \/ Fiber V3 with clearance on every side — a clean, made-to-fit match. It assembles in minutes with a screwdriver and Allen key and requires zero modification to your machine.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAlso compatible with other 400mm open-frame IR \/ fiber lasers — running a different machine? See our universal \u003ca href=\"\/products\/universal-400mm-ir-fiber-laser-engraver-enclosure-1064nm-safe\"\u003eUniversal 400mm IR \/ Fiber Laser Engraver Enclosure\u003c\/a\u003e.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eProtect your engraver and your shop\u003c\/h2\u003e\n\u003cp\u003eRunning a laser open on a bench is the fastest way to foul your shop and shorten your machine's life. Every pass lays down fine particulate that settles on rails, lenses, and electronics, while fumes drift straight into the room you're standing in. The IR \/ Fiber V3 wraps your machine in \u003cstrong\u003ecommercial-grade aluminum-lined composite panels\u003c\/strong\u003e that keep debris off your engraver, contain the plume at the source, and give you a clean, controlled environment every time you fire the beam. It's the difference between a machine that looks new in three years and one that doesn't.\u003c\/p\u003e\n\n\u003ch2\u003eWhy 1064 nm needs a different enclosure\u003c\/h2\u003e\n\u003cp\u003eA 1064 nm fiber beam is invisible near-infrared. Your blink reflex never fires because your eye never registers a flash, and the beam reflects off metal workpieces in directions you're not looking — which is exactly why open-frame IR engraving is riskier than diode work. Critically, the \u003cstrong\u003eamber acrylic panels used on diode enclosures block blue light (~450 nm) but do nothing at 1064 nm\u003c\/strong\u003e. This enclosure is built for IR: \u003cstrong\u003ealuminum-lined composite panels absorb stray and reflected beams\u003c\/strong\u003e, and a \u003cstrong\u003e1064 nm-rated viewing window\u003c\/strong\u003e lets you watch the job while the infrared stays inside the box.\u003c\/p\u003e\n\n\u003ch2\u003eDeploys fast and works with your workflow\u003c\/h2\u003e\n\u003cp\u003eThis enclosure was engineered around how open-frame fiber owners actually run jobs — not just to be a box:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick to deploy\u003c\/strong\u003e — no part swaps or permanent modifications. A screwdriver and Allen key are all you need, and the set-over design means you can lift it off for maintenance or transport.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightBurn-compatible hood camera\u003c\/strong\u003e — an optional USB camera mounts to the lid for accurate part alignment and LightBurn tracing without opening the enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotary-ready\u003c\/strong\u003e — about 15.75\" (400 mm) of internal height clears the rotary and the laser head, with room for objects up to an 80 mm tumbler or ring mandrel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable airflow vents\u003c\/strong\u003e — offer control over airflow volume and direction for cleaner, more efficient extraction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 wire grommet ports\u003c\/strong\u003e — feed in wires, air-assist tubing, and anything else that needs to pass into the enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual access doors\u003c\/strong\u003e — magnetically latched front and top doors make loading and adjustments easy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eContain the beam, smoke, and soot\u003c\/h2\u003e\n\u003cp\u003eOpen-frame 1064 nm fiber engravers are rated \u003cstrong\u003eClass 4\u003c\/strong\u003e — the highest laser hazard class — and marking metal releases fine particulate and fumes you don't want to breathe. The IR \/ Fiber V3 gives you real containment on both fronts:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1064 nm-rated viewing window\u003c\/strong\u003e — watch the job in real time while the invisible infrared beam is blocked.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum-lined composite panels\u003c\/strong\u003e — absorb stray and reflected 1064 nm energy instead of passing it into the room.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo 4\" exhaust ports\u003c\/strong\u003e — select which side vents to best suit your workspace, connect a flexible 4\" hose, and route smoke and fumes out a window or to a filter. Pair it with a 95 CFM or 200 CFM fan, our window exhaust kit, or PrintPRO 3 filtration for the level of extraction you need.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable airflow vents\u003c\/strong\u003e — fine-tune airflow volume and direction for efficient source capture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBOFA PrintPRO 3 compatible\u003c\/strong\u003e — integrate a professional fume-filtration system for indoor operation without external venting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eImportant: even with a 1064 nm-rated window and beam-absorbing panels, always wear OD-rated 1064 nm safety glasses while the laser is in use, and never defeat your machine's interlocks. This enclosure is designed to contain 1064 nm energy and fumes, but it is not certified to ANSI standards and does not reclassify your Class 4 laser. If you need a certified solution, contact us directly.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch2\u003eConfigure your kit\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanels \u0026amp; hardware\u003c\/strong\u003e — precision CNC-cut aluminum-lined composite panels with a 1064 nm-rated viewing window, plus rust-resistant hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinted parts\u003c\/strong\u003e — print your own brackets from the included files, or add our pre-printed parts for a complete, ready-to-build kit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdd-on accessories\u003c\/strong\u003e — LightBurn hood camera, dual-channel USB LED lighting kit, exhaust\/inline fan and window venting, and BOFA filtration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e Atomstack A20 Pro (1064 nm, 400 × 400 mm), plus other 400mm open-frame IR \/ fiber engravers within the footprint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal footprint:\u003c\/strong\u003e 750 mm W x 755 mm D x 405 mm H (29.5\" x 29.75\" x 16\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal working area:\u003c\/strong\u003e ~740 mm W x 745 mm D x 400 mm H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e designed for 1064 nm IR \/ fiber laser heads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanels:\u003c\/strong\u003e aluminum-lined composite (beam-absorbing) with a 1064 nm-rated viewing window\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e set-over tabletop enclosure — one universal size fits every listed machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExhaust:\u003c\/strong\u003e two 4\" exhaust ports (select your vent side); fan sold separately — 95 CFM (light-duty), 200 CFM (compact), window exhaust kit, or PrintPRO 3 filtration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorts \u0026amp; airflow:\u003c\/strong\u003e 3 wire grommet ports; adjustable airflow vents for volume and direction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoors:\u003c\/strong\u003e magnetically latched front and top access\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Sacramento, California, USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp style=\"text-align: center;\"\u003e\u003ciframe style=\"display: block; margin: 0 auto; max-width: 100%;\" width=\"960\" height=\"540\" src=\"https:\/\/www.youtube.com\/embed\/F6F99Y5YDmA\" title=\"Clearview Plastics Universal Laser Enclosure Walkthrough\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0415\/4661\/2904\/files\/Laser-engraver-whats-included.jpg?v=1726182377\" alt=\"What's included in the Clearview 400mm IR fiber laser enclosure kit\"\u003e\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/www.dropbox.com\/sh\/ni3feicsaq6semc\/AAAuVQgOZakxIHJjMMOPV5V1a?dl=0\" target=\"_blank\" rel=\"noopener\"\u003eDownload files and assembly instructions here\u003c\/a\u003e\u003c\/h3\u003e\n\n\u003ch2\u003eWhy choose the Clearview IR \/ Fiber V3 enclosure\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for 1064 nm, not a diode box\u003c\/strong\u003e — beam-absorbing composite panels and an IR-rated viewing window, not amber acrylic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects your eyes and your lungs\u003c\/strong\u003e — contains the invisible IR beam and keeps metal fume out of your breathing zone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorkflow-first features\u003c\/strong\u003e — hood camera, adjustable airflow vents, wire grommet ports, and dual doors built in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial-grade build\u003c\/strong\u003e — the weight and feel of professional lab equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUS-made by a small business\u003c\/strong\u003e — CNC-cut in Sacramento with genuine, hands-on support.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAbout Clearview Plastics\u003c\/h2\u003e\n\u003cp\u003eNeil Henderson here, owner and head designer at Clearview Plastics. My shop is a California-based artisan design studio, and we build every enclosure in-house in Sacramento. Our panels are professionally CNC-cut for accuracy, with parts designed specifically for each machine we support — this isn't a generic box off a marketplace. When you order through us, you work directly with me, and that relationship comes with my genuine appreciation and skilled, personal help.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eDoes this enclosure block the 1064 nm laser?\u003c\/strong\u003e\u003cbr\u003eIt's built to contain it. The \u003cstrong\u003ealuminum-lined composite panels absorb stray and reflected 1064 nm energy\u003c\/strong\u003e, and the \u003cstrong\u003eviewing window is rated for 1064 nm\u003c\/strong\u003e so you can watch the job without the infrared passing into the room. That said, always wear OD-rated 1064 nm safety glasses while the laser runs — the enclosure is designed to contain IR but is not certified to ANSI standards and does not reclassify your Class 4 laser.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I use the amber diode panels instead?\u003c\/strong\u003e\u003cbr\u003eNo. Amber acrylic blocks blue diode light (~450 nm) but does \u003cstrong\u003enot\u003c\/strong\u003e block 1064 nm infrared. IR requires opaque, absorptive panels and a 1064 nm-rated window — which is exactly what this enclosure uses. If you run a diode head, see our diode Universal V3 enclosure instead.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDoes it have an exhaust port for smoke and fumes?\u003c\/strong\u003e\u003cbr\u003eYes. The enclosure includes a 4\" exhaust port to connect a flexible 4\" hose and vent outside. From there, add the fan setup that fits your workload: a \u003cstrong\u003e95 CFM exhaust fan\u003c\/strong\u003e (includes the mounting bracket) for light-duty use, a \u003cstrong\u003e200 CFM compact fan\u003c\/strong\u003e for added air circulation, or our \u003cstrong\u003ewindow exhaust kit\u003c\/strong\u003e — an inline fan, window insert, and 16 feet of hose. If venting outside isn't possible, add a \u003cstrong\u003eBOFA PrintPRO 3\u003c\/strong\u003e filtration unit to clean the air indoors.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs there room for a rotary?\u003c\/strong\u003e\u003cbr\u003eYes. The internal height (about 400 mm \/ 15.75\") clears the rotary and the laser head, with enough room to engrave objects up to an 80 mm glass, tumbler, or ring mandrel.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat's included, and what do I supply?\u003c\/strong\u003e\u003cbr\u003eThe base kit includes the composite panels, viewing window, and hardware; you print the brackets from the included files. Add our pre-printed parts for a complete kit. In all cases you supply a 4\" dryer hose, and for heavy use we recommend adding an inline exhaust fan.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDo you ship internationally?\u003c\/strong\u003e\u003cbr\u003eYes. Shipping is calculated at checkout via USPS\/UPS\/FedEx (HS code 8538.10). Express services often cover import fees, but additional VAT, tariffs, or fees may apply depending on your country.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat is your return policy?\u003c\/strong\u003e\u003cbr\u003eWe offer a 30-day return policy. Unused, undamaged panels with the masking fully attached are eligible for a full refund less return shipping. If panels are damaged after shipment or the protective mask has been removed, we can't offer a refund. To check fitment, consider partially assembling with the mask still on — if it isn't for you, you're still eligible for a full refund.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy do the product photos vary slightly?\u003c\/strong\u003e\u003cbr\u003eWe update and improve our enclosures often, and as a small business a fresh photoshoot for every iteration isn't realistic. Function is always constant or improved. For the clearest picture of the current version, rely on the renderings rather than the photos.\u003c\/p\u003e","brand":"Clearview Plastics","offers":[{"title":"Default Title","offer_id":48268843548910,"sku":null,"price":899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0415\/4661\/2904\/files\/Universal_Enclosure_3.0_2024-Sep-24_08-32-05PM-000_CustomizedView28332064221_jpg.jpg?v=1727223070","url":"https:\/\/clearviewplastic.com\/products\/atomstack-a20-pro-ir-fiber-laser-engraver-enclosure-universal-fit","provider":"Clearview Plastics","version":"1.0","type":"link"}