{"product_id":"bambu-h3c-enclosure-table-guaranteed-fit-workstation-stand","title":"Bambu H3C Enclosure Table — Guaranteed-Fit Workstation Stand","description":"\u003ch2\u003eYou shouldn't need a step stool to change a spool.\u003c\/h2\u003e\n\u003cp\u003eYou put the AMS 3H on top of the H3C because that is where Bambu designed it to go. Then you put the printer on a bench, and the spool lid ended up at 55 inches. Every filament change, every TPU bypass, every tool swap through the AMS side window is now a reach up and over, blind, to a machine you paid $2,499 for. Reviewers used ladders. One bought the stand before the second spool.\u003c\/p\u003e\n\u003cp\u003eThe height is simple arithmetic. The H3C with the AMS 3H is 41 inches tall closed, and Bambu says to allow 1.3 metres — 51 inches — to open the AMS lid. Put the Clearview enclosure around it and the box is 44.3 inches. On a standard 30-inch bench the enclosure lid hinges at 74 inches and the AMS latch sits at 71. That is above eye level for nearly every adult who will ever use it.\u003c\/p\u003e\n\u003cp\u003eThe fix isn't a taller person. It's a shorter table. This one is 26 inches, on purpose: the enclosure lid lands at 70 inches, the AMS latch at 67, and the enclosure's side door — the one that lines up with the AMS side windows for spools and tools — sits between 48 and 67 inches. Eye height. Hand height. The machine ends up where you already are.\u003c\/p\u003e\n\n\u003ch3\u003eCut to your enclosure. Not to a category.\u003c\/h3\u003e\n\u003cp\u003eThe frame is the enclosure's footprint, and the top extends exactly one inch past the enclosure on every side. Enough overhang to level, latch, and grip. Not so much that you've bought a piece of furniture you have to find room for.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eH3C enclosure\u003c\/strong\u003e — 29\" × 28.42\" top, 26\" height, 27\" × 26.42\" frame. Fits the Clearview Bambu Lab H3C enclosure at 27 × 26.42 × 44.29 in, printer and AMS 3H inside.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuilt on 40-series black anodized aluminum extrusion with cast corner brackets and M8 hardware — the same structural system used for CNC machine frames and industrial workstations. The top is 3\/4\" edge-banded melamine: flat, sealed, wipes clean, and won't telegraph a heat cycle the way a raw wood top will. One centre rail per level, so the long spans are not open spans.\u003c\/p\u003e\n\u003cp\u003eIt is the Core XY XL table with the short rails 23 mm longer and the top 0.9 in deeper — because the H3C is 100 mm deeper than an H2 and the Core XY XL table does not clear it. See the \u003ca href=\"\/pages\/enclosure-table-fitment-guide\"\u003eenclosure table fitment guide\u003c\/a\u003e for the whole line.\u003c\/p\u003e\n\n\u003ch3\u003eThe H3C table, panel by panel\u003c\/h3\u003e\n\u003cdiv class=\"cvp-tbl-h3c-infographic\" style=\"margin:0 0 24px;\"\u003e\n\u003cimg loading=\"lazy\" style=\"display:block;width:100%;height:auto;margin:0 0 12px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0415\/4661\/2904\/files\/h3c-table-infographic-01-v2.webp\" alt=\"Clearview Bambu Lab H3C workstation table, panel 1 of 6 — the H3C Workstation Table: the right height, the right footprint, built to roll\"\u003e\n\u003cimg loading=\"lazy\" style=\"display:block;width:100%;height:auto;margin:0 0 12px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0415\/4661\/2904\/files\/h3c-table-infographic-02-v2.webp\" alt=\"Clearview Bambu Lab H3C workstation table, panel 2 of 6 — what it fixes: working height, stability and storage\"\u003e\n\u003cimg loading=\"lazy\" style=\"display:block;width:100%;height:auto;margin:0 0 12px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0415\/4661\/2904\/files\/h3c-table-infographic-03-v2.webp\" alt=\"Clearview Bambu Lab H3C workstation table, panel 3 of 6 — what is on it: melamine top, 4040 extrusion and cast corners, keyed cabinet lock, smoked acrylic cabinet, leveling feet or casters, centre rail on every level\"\u003e\n\u003cimg loading=\"lazy\" style=\"display:block;width:100%;height:auto;margin:0 0 12px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0415\/4661\/2904\/files\/h3c-table-infographic-04-v2.webp\" alt=\"Clearview Bambu Lab H3C workstation table, panel 4 of 6 — configure your table: open frame or storage cabinet, flat-pack or assembled\"\u003e\n\u003cimg loading=\"lazy\" style=\"display:block;width:100%;height:auto;margin:0 0 12px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0415\/4661\/2904\/files\/h3c-table-infographic-05-v2.webp\" alt=\"Clearview Bambu Lab H3C workstation table, panel 5 of 6 — one mobile workstation: roll it where you need it, lock it in place\"\u003e\n\u003cimg loading=\"lazy\" style=\"display:block;width:100%;height:auto;margin:0 0 12px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0415\/4661\/2904\/files\/h3c-table-infographic-06-v2.webp\" alt=\"Clearview Bambu Lab H3C workstation table, panel 6 of 6 — built to outlast the printer on top of it, built in the USA\"\u003e\n\u003c\/div\u003e\n\u003ch3\u003eRated for what's actually on it\u003c\/h3\u003e\n\u003cp\u003eThe H3C with the AMS 3H weighs 80 pounds before the enclosure goes around it and nine spools go in it. This frame is specified for the printer, the AMS, the enclosure, a full spool bank and a large part \u003cstrong\u003ewith margin for motion\u003c\/strong\u003e — because the number that matters isn't what the table holds sitting still, it's what it holds while the fastest machine Bambu makes throws its toolhead around at 25,000 mm\/s² on top of it.\u003c\/p\u003e\n\u003cp\u003eFour leveling feet handle a floor that isn't as flat as you think it is. A machine that rocks a millimetre is a machine that ghosts — and on a 44-inch box, a millimetre at the feet is a lot more at the lid.\u003c\/p\u003e\n\n\u003ch3\u003eThe air you're standing in\u003c\/h3\u003e\n\u003cp\u003eThe H3C exhausts out the back when its chamber has to cool, and the enclosure's two rear ports are where that air gets dealt with — an exhaust fan and a 4\" run to a window, a recirculating filter, or the Bambu E1 purifier's hose. All of that has to live behind the machine. The open frame leaves the rear clear for the hose and the purifier, the T-slots take cable clips and the hose clamp, and the storage cabinet keeps the E1's filter spares and the desiccant where they belong. Where the exhaust goes is a bench decision; this bench was designed with one in mind.\u003c\/p\u003e\n\n\u003ch3\u003eOptional: locking enclosed compartment\u003c\/h3\u003e\n\u003cp\u003eAdd a fully enclosed mid-shelf with smoked acrylic panels and a cam lock. Filament, dryers, nozzles, tools, and spares stay visible, dust-free, and \u003cstrong\u003esecured\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIf you run this machine in a classroom, a shared lab, a makerspace, or any shop where more than one person walks past it, you already know why that's on the list. Consumables walk. This is the version of the answer that doesn't involve a plastic bin and hope.\u003c\/p\u003e\n\u003cp\u003ePair it with the lock kit on the enclosure — front door, side door and lid — and the whole stack is one key: printer, nine loaded spools, and the eight waiting underneath.\u003c\/p\u003e\n\n\u003ch3\u003eA mobile 3D printing workstation\u003c\/h3\u003e\n\u003cp\u003ePrinter, AMS, enclosure, filtration and spool storage on one rigid frame with a footprint of 29 by 28 inches. Add locking casters and it rolls to the window for the exhaust run, to the wall outlet the short factory cables can actually reach, or to the next classroom — and then it locks down and stops moving. That is the difference between a printer on a bench and a 3D printing workstation.\u003c\/p\u003e\n\n\u003ch3\u003eIt outlives the printer\u003c\/h3\u003e\n\u003cp\u003eYour H3C will not be your last machine. Two years from now there's a faster one with a different footprint, and the bench you bought for this one is either the right size by luck or it's scrap. Extrusion doesn't work that way. \u003cstrong\u003eEvery surface of this frame is a mounting rail.\u003c\/strong\u003e Re-drop the T-nuts, move a rail, add a shelf, hang a spool holder, bolt on a monitor arm, restretch it for the next machine. It reconfigures because it was designed to be reconfigured.\u003c\/p\u003e\n\u003cp\u003eYou're not buying a table for a printer. You're buying the bench that survives the next three.\u003c\/p\u003e\n\n\u003ch3\u003eShips flat. Assembles with one hex key.\u003c\/h3\u003e\n\u003cp\u003eEvery extrusion arrives cut to length and labeled. Brackets, T-nuts, and hardware are counted and bagged by step. Flat-pack keeps the freight sane and keeps the price honest — you're paying for aluminum and precision, not for air in a box.\u003c\/p\u003e\n\u003cp\u003eAssembly is straightforward and takes one person an afternoon. No welding, no drilling, no cutting. If you can build the enclosure, you can build this. Or choose the assembled option and it arrives on a pallet, built, squared and ready to run.\u003c\/p\u003e\n\n\u003ch3\u003eAbout these photos, and about the fit\u003c\/h3\u003e\n\u003cp\u003eThe renders on this page show the H3C table under the H3C enclosure, in both the open-frame and storage-cabinet configurations. The dimensions listed on this page are the dimensions you receive: frame 27 × 26.42 in, top 29 × 28.42 in, 26 in tall. The top ships as 3\/4\" edge-banded melamine.\u003c\/p\u003e\n\n\u003ch3\u003eMade in Rocklin, California\u003c\/h3\u003e\n\u003cp\u003eCut, kitted, and shipped by the same shop that makes your enclosure. Same tolerances, same people, same phone number when you have a question. Backed by our 100% satisfaction guarantee and a 1-year warranty against manufacturer defects.\u003c\/p\u003e\n\n\u003chr\u003e\n\u003cp\u003e\u003cem\u003eNot running an H3C? We build these for any enclosure in our catalog, and for machines that aren't. Send us your model and we'll confirm the exact footprint, height, and load rating before you order.\u003c\/em\u003e\u003c\/p\u003e\n","brand":"Clearview Plastics","offers":[{"title":"Open frame \/ Flat Packed kit","offer_id":49946800161006,"sku":"CVP-TBL-H3C","price":1849.0,"currency_code":"USD","in_stock":true},{"title":"Open frame \/ Table assembled and ready to run","offer_id":49946800193774,"sku":"CVP-TBL-H3C-ASM","price":3098.0,"currency_code":"USD","in_stock":true},{"title":"Storage cabinet kit \/ Flat Packed kit","offer_id":49946800226542,"sku":"CVP-TBL-H3C-CAB","price":2298.0,"currency_code":"USD","in_stock":true},{"title":"Storage cabinet kit \/ Table assembled and ready to run","offer_id":49946800259310,"sku":"CVP-TBL-H3C-CAB-ASM","price":3547.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0415\/4661\/2904\/files\/h3c-table-photo-01.webp?v=1793828939","url":"https:\/\/clearviewplastic.com\/products\/bambu-h3c-enclosure-table-guaranteed-fit-workstation-stand","provider":"Clearview Plastics","version":"1.0","type":"link"}