{"product_id":"bambu-lab-h2d-h2s-h2c-printer-stand-storage-rack","title":"Bambu Lab H2D \/ H2S \/ H2C Printer Stand — Shelving \u0026 Storage Rack with Slide-Out Deck, 12-Spool Drawer and AMS 2 Pro Shelf","description":"\u003cdiv style=\"max-width:1100px;margin:0 auto;\"\u003e\n  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0415\/4661\/2904\/files\/cvp-rack-bambu-h2-01-problem-v2.webp?v=1788640642\" alt=\"The problem: an H2D weighs 68 pounds before the AMS 2 Pro, and its power switch, ports, PTFE tubes and exhaust are on the back, so rear access means dead-lifting the printer; a light bench returns its motion as rocking and ringing. An H2 needs a workstation with stow-and-go storage built around how it works.\" width=\"1600\" height=\"1251\" style=\"display:block;width:100%;height:auto;margin:0 0 12px;\"\u003e\n  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0415\/4661\/2904\/files\/cvp-rack-bambu-h2-02-answer.webp?v=1788638068\" alt=\"The answer: a Baltic birch printer stand cut around the Bambu Lab H2 body, with the printer on a slide-out deck rated for its weight, twelve spools in a drawer below, the AMS 2 Pro on top, LED lighting included, locking casters optional; ships flat, no glue.\" width=\"1600\" height=\"1219\" style=\"display:block;width:100%;height:auto;margin:0 0 12px;\"\u003e\n  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0415\/4661\/2904\/files\/cvp-rack-bambu-03-features.webp?v=1788637940\" alt=\"Annotated render with the deck slid out and the drawer open: slide-out printer deck, heavy-duty locking slides, 12-spool soft-close drawer, slot pull, AMS shelf on the cabinet top, LED strip under the top edge.\" width=\"1600\" height=\"2092\" style=\"display:block;width:100%;height:auto;margin:0 0 12px;\"\u003e\n  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0415\/4661\/2904\/files\/cvp-rack-bambu-04-buying.webp?v=1788637940\" alt=\"What you are buying: the P-series cabinet (X1C, P1S, P1P, P2S, X2D; 600 by 600 by 895 mm) or the H-series cabinet (H2D, H2S, H2C), with leveling feet or locking casters; 1\/2 inch prefinished Baltic birch, slides, dowels, screws, feet and a 12 V LED kit included; printer, AMS, filament and enclosure not included.\" width=\"1600\" height=\"2379\" style=\"display:block;width:100%;height:auto;margin:0 0 12px;\"\u003e\n  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0415\/4661\/2904\/files\/cvp-rack-bambu-05-mobility.webp?v=1788637940\" alt=\"Mobility and stability: roll on unlocked casters, lock wheel and swivel on all four before printing, and let the mass of half-inch Baltic birch over a 600 mm footprint damp vibration; leveling feet standard, locking casters optional, stackable two high.\" width=\"1600\" height=\"1858\" style=\"display:block;width:100%;height:auto;margin:0 0 12px;\"\u003e\n  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0415\/4661\/2904\/files\/cvp-rack-bambu-06-fit.webp?v=1788637940\" alt=\"Fit and support: cut for the Bambu X1C, P1S, P1P, P2S and X2D or for the H2D, H2S and H2C; CNC-routed in Rocklin, California; one-year warranty; screwdriver or hex key assembly; ships flat in two cartons; Built in the USA.\" width=\"1600\" height=\"1995\" style=\"display:block;width:100%;height:auto;margin:0 0 28px;\"\u003e\n\u003ch2 style=\"font-size:26px;font-weight:600;line-height:1.2;color:#14171A;margin:0 0 12px;\"\u003eNobody wants to pick up an H2 twice.\u003c\/h2\u003e\n\u003cp style=\"font-size:16px;line-height:1.6;color:#2A3138;margin:0 0 16px;\"\u003eAn H2D weighs 68 pounds before the AMS 2 Pro goes on top of it. Its power switch, its ports, its PTFE tubes and its exhaust all live on the back. So every time you need the back of the machine you are either dead-lifting it forward across the bench or asking someone to take the other side. “I’m not picking up the H2 again,” is how one owner put it on the Bambu forum. He is right.\u003c\/p\u003e\n\u003cp style=\"font-size:16px;line-height:1.6;color:#2A3138;margin:0 0 16px;\"\u003eThe same mass is why a light bench fights this printer. An H2 accelerates a heavy toolhead through thousands of direction changes an hour; a hollow table or a wire rack returns that energy as rocking, and rocking prints as ringing.\u003c\/p\u003e\n\u003cp style=\"font-size:16px;line-height:1.6;color:#2A3138;margin:0 0 16px;\"\u003e\u003cstrong\u003eAn H2 needs a workstation built around its workflow: stow-and-go storage under it, the AMS 2 Pro above it, and the back of the machine a pull away — without anyone lifting it.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 style=\"font-size:19px;font-weight:600;color:#14171A;margin:22px 0 10px;\"\u003eThe printer comes to you\u003c\/h3\u003e\n\u003cp style=\"font-size:16px;line-height:1.6;color:#2A3138;margin:0 0 16px;\"\u003eThe deck the H2 sits on rides on heavy-duty locking slides specified for the machine. Pull it forward and the printer clears the cabinet — rear panel, switch, cables, exhaust and lid. Nothing gets lifted. Push it back and lock it.\u003c\/p\u003e\n\u003ch3 style=\"font-size:19px;font-weight:600;color:#14171A;margin:22px 0 10px;\"\u003eTwelve spools, one drawer\u003c\/h3\u003e\n\u003cp style=\"font-size:16px;line-height:1.6;color:#2A3138;margin:0 0 16px;\"\u003eUnder the printer is a full-width drawer on soft-close slides, sized for up to twelve spools. The slot in the drawer face shows you what is in there without opening it. Filament stays where the printer is, not in a tote across the room.\u003c\/p\u003e\n\u003ch3 style=\"font-size:19px;font-weight:600;color:#14171A;margin:22px 0 10px;\"\u003eAMS 2 Pro on top. Lit underneath.\u003c\/h3\u003e\n\u003cp style=\"font-size:16px;line-height:1.6;color:#2A3138;margin:0 0 16px;\"\u003eThe cabinet top is the AMS 2 Pro shelf, with a short, straight feed path down to the printer. A 12 V LED strip under the top edge lights the build plate and the front of the machine — useful at 2 a.m. when a first layer is not sticking, and it makes the whole station read as finished.\u003c\/p\u003e\n\u003ch3 style=\"font-size:19px;font-weight:600;color:#14171A;margin:22px 0 10px;\"\u003eHalf-inch Baltic birch. No glue.\u003c\/h3\u003e\n\u003cp style=\"font-size:16px;line-height:1.6;color:#2A3138;margin:0 0 16px;\"\u003eEvery panel is cut from prefinished 1\/2\" (12 mm) Baltic birch — nine void-free plies with a good face veneer, UV-cured on both faces at the mill so it arrives finished. It goes together with dowels and cabinet screws using a screwdriver or a hex key. No glue, no clamps, no wood filler, no sanding, no finish to apply. The exposed ply edge is the look, not a shortcut.\u003c\/p\u003e\n\u003cp style=\"font-size:16px;line-height:1.6;color:#2A3138;margin:0 0 16px;\"\u003eStiff, heavy plywood is also why this base behaves. Wood damps vibration where a thin steel rack rings, and a cabinet with a wider footprint than the printer is harder to rock than one that matches it.\u003c\/p\u003e\n\u003ch3 style=\"font-size:19px;font-weight:600;color:#14171A;margin:22px 0 10px;\"\u003eSized for the H2D, H2S and H2C\u003c\/h3\u003e\n\u003cp style=\"font-size:16px;line-height:1.6;color:#2A3138;margin:0 0 16px;\"\u003eCut around the H2 body at 492 × 514 × 626 mm with the AMS 2 Pro on the shelf above it. Overall cabinet dimensions are on the spec sheet. Stackable for a print farm.\u003c\/p\u003e\n\u003ch3 style=\"font-size:19px;font-weight:600;color:#14171A;margin:22px 0 10px;\"\u003eWheels, or feet\u003c\/h3\u003e\n\u003cp style=\"font-size:16px;line-height:1.6;color:#2A3138;margin:0 0 16px;\"\u003eShips with leveling feet. Choose the locking-caster option to roll it — to the other side of the shop, to the next classroom, out from the wall — and lock all four before you print. Casters that lock are the difference between a portable printer and a wobbly one. An H2 on locked casters moves once, on purpose, and then does not move at all.\u003c\/p\u003e\n\u003ch3 style=\"font-size:19px;font-weight:600;color:#14171A;margin:22px 0 10px;\"\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cul style=\"font-size:16px;line-height:1.6;color:#2A3138;margin:0 0 16px;padding-left:22px;\"\u003e\n  \u003cli\u003eCNC-cut prefinished Baltic birch panels\u003c\/li\u003e\n  \u003cli\u003eSlide-out printer deck on heavy-duty locking slides\u003c\/li\u003e\n  \u003cli\u003e12-spool drawer on soft-close slides\u003c\/li\u003e\n  \u003cli\u003eLED lighting kit with power supply\u003c\/li\u003e\n  \u003cli\u003eLeveling feet\u003c\/li\u003e\n  \u003cli\u003eDowels, cabinet screws and hardware, bagged by step\u003c\/li\u003e\n  \u003cli\u003ePrinted instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"font-size:16px;line-height:1.6;color:#2A3138;margin:0 0 16px;\"\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e the printer, the AMS 2 Pro, filament, casters (optional) and the enclosure (a separate Clearview product). The renders show them for scale. Standard kits ship in 10 business days or less.\u003c\/p\u003e\n\u003ch3 style=\"font-size:19px;font-weight:600;color:#14171A;margin:22px 0 10px;\"\u003eMade in Rocklin, California\u003c\/h3\u003e\n\u003cp style=\"font-size:16px;line-height:1.6;color:#2A3138;margin:0 0 16px;\"\u003eCut, kitted and shipped by the same shop that makes your enclosure. Built in the USA. 100% satisfaction guarantee and a 1-year warranty against manufacturer defects.\u003c\/p\u003e\n\u003cp style=\"font-size:16px;line-height:1.6;color:#2A3138;margin:0 0 16px;\"\u003e\u003cem\u003eRunning an X1C, P1S, P1P, P2S or X2D? That one is the P-series stand. Running something else? Send us the model.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3 style=\"font-size:19px;font-weight:600;color:#14171A;margin:22px 0 10px;\"\u003eFAQ\u003c\/h3\u003e\n\u003cp style=\"font-size:16px;line-height:1.6;color:#2A3138;margin:0 0 16px;\"\u003e\u003cstrong\u003eWhat is your return policy?\u003c\/strong\u003e\u003cbr\u003eWe have a 30 day return policy. Unused, undamaged kits are eligible for a full refund less return shipping. Kits that have been assembled or show wear cannot be refunded. If you are unsure about fit, dry-fit the deck and drawer before you drive the screws home.\u003c\/p\u003e\n\u003cp style=\"font-size:16px;line-height:1.6;color:#2A3138;margin:0 0 16px;\"\u003e\u003cstrong\u003eThere are some differences between your product pictures.\u003c\/strong\u003e\u003cbr\u003eWe update the design often and do not reshoot for every iteration. Function is always constant or better as we improve things. For the clearest indication of our current version, rely on the renderings rather than the photos.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Clearview Plastics","offers":[{"title":"Default Title","offer_id":49541501288686,"sku":"CVP-RACK-BAMBU-H2","price":1675.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0415\/4661\/2904\/files\/3D_printer_shelving_system_2024-Oct-10_11-34-31PM-000_CustomizedView30602853325_jpg.jpg?v=1728604926","url":"https:\/\/clearviewplastic.com\/products\/bambu-lab-h2d-h2s-h2c-printer-stand-storage-rack","provider":"Clearview Plastics","version":"1.0","type":"link"}