{"product_id":"creality-k3-enclosure-table-workstation-stand","title":"Creality K3 Enclosure Table — Workstation Stand","description":"\u003ch2\u003eTwenty-five microns after every nozzle change. Then the bench moves.\u003c\/h2\u003e\n\n\u003cp\u003eThe K3 swaps between four nozzles in about five seconds, and Creality specifies the head back in position within 25 microns — 0.025 mm — after every change. That is the whole promise of a toolchanger: four colors or four materials that meet on the part exactly where the slicer put them.\u003c\/p\u003e\n\n\u003cp\u003eTwenty-five microns is measured from the printer’s own frame. Every change parks one nozzle, picks up the next, and launches the head back into the print at up to 20,000 mm\/s², dozens of times a layer on a multi-color job. If the bench under it rocks or racks under that load, the frame the printer measured from has moved, and the next color goes down a fraction off. It shows as seams that don’t line up where two colors meet, a wall that steps out by a hair at every material boundary.\u003c\/p\u003e\n\n\u003cp\u003eThe printer can hold 25 microns. The surface under it has to hold them too.\u003c\/p\u003e\n\n\u003cp\u003eThis is that surface: a robust aluminum extrusion frame cut to the Clearview Core XY enclosure the K3 lives in, with shelf rails ready for a storage cabinet underneath. Add the cabinet, a keyed lock for it, and locking casters so it rolls between rooms and out from the wall for cleaning. A height set so the door, the top hatch and the feed system sit where your hands and eyes already are.\u003c\/p\u003e\n\n\u003ch3\u003eCut to your enclosure. Not to a category.\u003c\/h3\u003e\n\n\u003cp\u003eThe top extends exactly half an inch past the enclosure on every side. Enough overhang to level, latch, and grip. Not so much that you’ve bought a piece of furniture you have to find room for.\u003c\/p\u003e\n\n\u003ctable style=\"width:100%; border-collapse:collapse; font-size:14px; margin:0 0 16px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#eef2f5;\"\u003e\n\u003cth style=\"text-align:left; padding:8px;\"\u003eSize\u003c\/th\u003e\n\u003cth style=\"text-align:left; padding:8px;\"\u003eFits enclosure\u003c\/th\u003e\n\u003cth style=\"text-align:left; padding:8px;\"\u003eTable top\u003c\/th\u003e\n\u003cth style=\"text-align:left; padding:8px;\"\u003eTable height\u003c\/th\u003e\n\u003cth style=\"text-align:left; padding:8px;\"\u003eWorking height\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eK3 — 23.75 × 23.5 × 24 in\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003e24.75 × 24.5 in\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003e30 in\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003e54 in to top of enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#fafcfd;\"\u003e\n\u003ctd style=\"padding:8px;\"\u003e\u003cstrong\u003eTall\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003eK3, tall — 23.75 × 23.5 × 31.5 in\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003e24.75 × 24.5 in\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003e28 in\u003c\/td\u003e\n\u003ctd style=\"padding:8px;\"\u003e59.5 in to top of enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eBoth sizes use the same 24.75 × 24.5-inch top — the enclosure footprint doesn’t change, only its height. The tall enclosure gives the K3’s filament feed headroom above the printer and ships on a frame two inches lower, so the top of a 31.5-inch enclosure lands at 59.5 inches instead of 61.5: the hatch stays something you look into, not something you reach over.\u003c\/p\u003e\n\n\u003cp style=\"font-size:14px;\"\u003e\u003ca href=\"\/pages\/enclosure-table-fitment-guide\"\u003eSee the full enclosure table fitment guide\u003c\/a\u003e for every machine we build for.\u003c\/p\u003e\n\n\u003cp\u003eBuilt on a robust black aluminum extrusion frame with cast corner brackets and M8 hardware — the same structural system used for CNC machine frames and industrial workstations. The top is 3\/4″ melamine: flat, sealed, wipes clean, and won’t telegraph a heat cycle the way a raw wood top will.\u003c\/p\u003e\n\n\u003ch3\u003eAbout these photos, and about the fit\u003c\/h3\u003e\n\n\u003cp\u003eThe renderings on this page show the workstation table as a system — frame, top, storage cabinet kit and casters. The cabinet kit and casters are options; the standard table is the open frame with leveling feet. The images are \u003cstrong\u003egeneral-fit images used across the table line\u003c\/strong\u003e, not a render of this exact SKU. The geometry is what’s specific to you: \u003cstrong\u003ethe dimensions listed above are the dimensions you receive\u003c\/strong\u003e, and the top is cut to sit \u003cstrong\u003ehalf an inch proud of the enclosure on every side\u003c\/strong\u003e — +1″ in width, +1″ in depth, every time.\u003c\/p\u003e\n\n\u003cp\u003eOne note on finish: the renderings show a wood-tone top. Yours ships as 3\/4″ edge-banded melamine — the geometry in the images is right, the surface is melamine.\u003c\/p\u003e\n\n\u003ch3\u003eRated for what’s actually on it\u003c\/h3\u003e\n\n\u003cp\u003eA toolchanger carries more machine than a single-nozzle printer — four nozzles, the dock and the feed system — and then come the enclosure, the spools and a large part. This frame is specified for a \u003cstrong\u003e120 lb working load\u003c\/strong\u003e with margin for motion — because the number that matters isn’t what the table holds sitting still, it’s what it holds while a fast machine throws mass around on top of it.\u003c\/p\u003e\n\n\u003cp\u003eFour leveling feet, standard on every table, handle a garage slab that isn’t as flat as you think it is. A machine that rocks a millimeter is a machine that ghosts.\u003c\/p\u003e\n\n\u003ch3\u003eThe air you’re standing in\u003c\/h3\u003e\n\n\u003cp\u003eFour nozzles means four materials in one job — PLA beside ABS or ASA, a flexible TPU beside a rigid one — and each one puts its own mix of VOCs and ultrafine particles into the air. An enclosure contains those emissions. It does not make them disappear. Where the exhaust goes, how the intake breathes, and whether the hose has a clean run to a window or a filter are workspace decisions — they get solved at the bench, not in the slicer.\u003c\/p\u003e\n\n\u003cp\u003eThis table is built to be part of that system: an open frame that never pinches a hose, T-slot channels on every rail for cable and duct management, and a footprint sized so the enclosure — not the table — decides how close you can sit to the wall. Give the 4-inch exhaust a clean run behind it and you’re done. If you’re running ABS, ASA, or nylon anywhere near where people sit, this matters more than the print quality argument does.\u003c\/p\u003e\n\n\u003ch3\u003eOption: storage cabinet kit\u003c\/h3\u003e\n\n\u003cp\u003eEvery table ships with the shelf rails already in the frame. The storage cabinet kit bolts onto them: a melamine shelf, smoked acrylic back, ends and front, and a laser-cut door on T-slot hinges with a pull and magnetic catch. The cabinet is 18.7″ clear on both frame heights. Filament, dryers, nozzles, tools and spares stay dust-free and out of sight. Add it with the table or bolt it on later; it uses the same slots.\u003c\/p\u003e\n\n\u003ch3\u003eOption: keyed cam lock\u003c\/h3\u003e\n\n\u003cp\u003eAvailable with the cabinet kit, keyed alike across your tables. If you run this machine in a classroom, a shared lab, a makerspace, or any shop where more than one person walks past it, you already know why that’s on the list. Consumables walk. This is the version of the answer that doesn’t involve a plastic bin and hope.\u003c\/p\u003e\n\n\u003ch3\u003eOption: locking casters\u003c\/h3\u003e\n\n\u003cp\u003eA set of four in place of the leveling feet. The workstation rolls between rooms and out from the wall for cleaning — a library sharing one printer across programs, a classroom, a shop floor that gets swept — then locks where you leave it. The shelf rail sits low on the legs, so there’s almost no unbraced leg to flex when a caster meets a door threshold. Table height stays the stated height either way.\u003c\/p\u003e\n\n\u003ch3\u003eIt outlives the printer\u003c\/h3\u003e\n\n\u003cp\u003eHere’s the part worth thinking about before you compare prices.\u003c\/p\u003e\n\n\u003cp\u003eYour K3 will not be your last printer. Two years from now there’s a faster machine with a different footprint, and the bench you bought for this one is either the right size by luck or it’s scrap. Extrusion doesn’t work that way. \u003cstrong\u003eEvery surface of this frame is a mounting rail.\u003c\/strong\u003e Re-drop the T-nuts, move a rail, add a shelf, hang a spool holder, bolt on a monitor arm, restretch it for the next machine. It reconfigures because it was designed to be reconfigured.\u003c\/p\u003e\n\n\u003cp\u003eYou’re not buying a table for a printer. You’re buying the bench that survives the next three.\u003c\/p\u003e\n\n\u003ch3\u003eShips flat. Assembles with one hex key.\u003c\/h3\u003e\n\n\u003cp\u003eEvery extrusion arrives cut to final length, deburred, and labeled, with the leg bores already tapped for the feet or casters. The top comes CNC-cut with the mounting holes counterbored, and the shelf rails are already in the frame, ready for the cabinet kit. Brackets, T-nuts, and hardware are counted and bagged by step. Flat-pack keeps the freight sane and keeps the price honest — you’re paying for aluminum and precision, not for air in a box.\u003c\/p\u003e\n\n\u003cp\u003eAssembly is straightforward and takes one person about two hours. No welding, no drilling, no cutting. If you can build the enclosure, you can build this. Prefer it ready to run? Choose the assembled option and it arrives built.\u003c\/p\u003e\n\n\u003ch3\u003eMade in Rocklin, California\u003c\/h3\u003e\n\n\u003cp\u003eCut, kitted, and shipped by the same shop that makes your enclosure. Same tolerances, same people, same phone number when you have a question. Backed by our 100% satisfaction guarantee and a 1-year warranty against manufacturer defects.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003cp\u003e\u003cem\u003eNot running a K3? We build these for every enclosure in our catalog, and for machines that aren’t. Send us your model and we’ll confirm the exact footprint, height, and load rating before you order.\u003c\/em\u003e\u003c\/p\u003e","brand":"Clearview Plastics","offers":[{"title":"Standard — K3 enclosure (24 in) \/ Open frame \/ Flat Packed kit","offer_id":49821939859694,"sku":"CVP-TBL-CRK3-STD","price":1119.0,"currency_code":"USD","in_stock":true},{"title":"Standard — K3 enclosure (24 in) \/ Open frame \/ Table assembled and ready to run","offer_id":49821939925230,"sku":"CVP-TBL-CRK3-STD-ASM","price":2168.0,"currency_code":"USD","in_stock":true},{"title":"Standard — K3 enclosure (24 in) \/ Storage cabinet kit \/ Flat Packed kit","offer_id":49821939892462,"sku":"CVP-TBL-CRK3-STD-CAB","price":1488.0,"currency_code":"USD","in_stock":true},{"title":"Standard — K3 enclosure (24 in) \/ Storage cabinet kit \/ Table assembled and ready to run","offer_id":49821939957998,"sku":"CVP-TBL-CRK3-STD-CAB-ASM","price":2537.0,"currency_code":"USD","in_stock":true},{"title":"Tall — K3 tall enclosure (31.5 in) \/ Open frame \/ Flat Packed kit","offer_id":49821939990766,"sku":"CVP-TBL-CRK3-TALL","price":1099.0,"currency_code":"USD","in_stock":true},{"title":"Tall — K3 tall enclosure (31.5 in) \/ Open frame \/ Table assembled and ready to run","offer_id":49821940056302,"sku":"CVP-TBL-CRK3-TALL-ASM","price":2148.0,"currency_code":"USD","in_stock":true},{"title":"Tall — K3 tall enclosure (31.5 in) \/ Storage cabinet kit \/ Flat Packed kit","offer_id":49821940023534,"sku":"CVP-TBL-CRK3-TALL-CAB","price":1468.0,"currency_code":"USD","in_stock":true},{"title":"Tall — K3 tall enclosure (31.5 in) \/ Storage cabinet kit \/ Table assembled and ready to run","offer_id":49821940089070,"sku":"CVP-TBL-CRK3-TALL-CAB-ASM","price":2517.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0415\/4661\/2904\/files\/clearview-enclosure-workstation-table-01-printer-enclosure-locking-compartment_828c5b6f-be69-4024-9ec6-6a0c7a97be5c.webp?v=1789503325","url":"https:\/\/clearviewplastic.com\/products\/creality-k3-enclosure-table-workstation-stand","provider":"Clearview Plastics","version":"1.0","type":"link"}