{"product_id":"elegoo-neptune-4-max-enclosure-table-workstation-stand","title":"Elegoo Neptune 4 Max Enclosure Table — Workstation Stand","description":"\u003ch2\u003eYour bench is 30 inches deep. This enclosure is 39.\u003c\/h2\u003e\n\n\u003cp\u003eThat's the whole problem, and almost everyone discovers it with the enclosure already assembled. Desks stop at 24 inches. Good workbenches stop at 30. The Neptune 4 Max enclosure needs \u003cstrong\u003e39 inches of depth\u003c\/strong\u003e, supported, all the way to the back edge.\u003c\/p\u003e\n\n\u003cp\u003eAn unsupported rear edge isn't a cosmetic problem. A bed-slinger this size runs its bed — and the part growing on it — front to back for the entire job. Put that motion over a cantilevered back edge and the enclosure rocks on a lever you built for it.\u003c\/p\u003e\n\n\u003cp\u003eYou're not shopping this table against a cheaper one. In this footprint, the cheaper one doesn't exist. The table that fits a Neptune 4 Max has to be made for a Neptune 4 Max.\u003c\/p\u003e\n\n\u003ch3\u003eCut to your enclosure. Not to a category.\u003c\/h3\u003e\n\u003cp\u003eThe top extends exactly half an inch past the enclosure on every side. Enough overhang to level, latch, and grip. Not so much that you've bought a piece of furniture you have to find room for.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeptune 4 Max\u003c\/strong\u003e — 27.2\" × 40\" top, 26\" height. Fits the Neptune 4 Max enclosure at 26.2 × 39 × 31.5 in, fully supported to the back edge.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 26-inch frame keeps a 31.5-inch enclosure's top hatch at 57.5 inches — at hand and eye height, not above it.\u003c\/p\u003e\n\u003cp style=\"font-size:14px;\"\u003e\u003ca href=\"\/pages\/enclosure-table-fitment-guide\"\u003eSee the full enclosure table fitment guide\u003c\/a\u003e for every machine we build for.\u003c\/p\u003e\n\u003cp\u003eBuilt on 40-series black aluminum extrusion with cast corner brackets and M8 hardware — the same structural system used for CNC machine frames and industrial workstations. The top is 3\/4″ melamine: flat, sealed, wipes clean, and won't telegraph a heat cycle the way a raw wood top will.\u003c\/p\u003e\n\n\u003ch3\u003eRated for what's actually on it\u003c\/h3\u003e\n\u003cp\u003eA Neptune 4 Max swings a 420 mm bed with the print riding on it, hour after hour. This frame is specified for a \u003cstrong\u003e150 lb working load\u003c\/strong\u003e with margin for motion — because the number that matters isn't what the table holds sitting still, it's what it holds while a bed-slinger throws mass around on top of it.\u003c\/p\u003e\n\u003cp\u003eFour leveling feet handle a floor that isn't as flat as you think it is. A machine that rocks a millimeter is a machine that ghosts.\u003c\/p\u003e\n\n\u003ch3\u003eThe air you're standing in\u003c\/h3\u003e\n\u003cp\u003eAn enclosure contains fumes and ultrafine particles. It does not make them disappear. If you run ABS, ASA, or nylon, where the exhaust goes and whether the hose reaches a window or a filter without a kink are decisions that get made at the bench, not in the slicer. This frame stays out of the way of both: an open structure that never pinches a hose, T-slot channels on every rail for cable and duct management, and a footprint that lets the enclosure — not the table — decide how much room the 4-inch run gets behind it.\u003c\/p\u003e\n\n\u003ch3\u003eOptional: locking enclosed compartment\u003c\/h3\u003e\n\u003cp\u003eAdd a fully enclosed mid-shelf with clear acrylic panels and a cam lock. Filament, dryers, nozzles, tools, and spares stay visible, dust-free, and \u003cstrong\u003esecured\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIf you run this machine in a classroom, a shared lab, a makerspace, or any shop where more than one person walks past it, you already know why that's on the list. Consumables walk. This is the version of the answer that doesn't involve a plastic bin and hope.\u003c\/p\u003e\n\n\u003ch3\u003eIt outlives the printer\u003c\/h3\u003e\n\u003cp\u003eYour Neptune 4 Max will not be your last machine. Two years from now there's a faster one with a different footprint, and the bench you bought for this one is either the right size by luck or it's scrap. Extrusion doesn't work that way. \u003cstrong\u003eEvery surface of this frame is a mounting rail.\u003c\/strong\u003e Re-drop the T-nuts, move a rail, add a shelf, hang a spool holder, bolt on a monitor arm, restretch it for the next machine. It reconfigures because it was designed to be reconfigured.\u003c\/p\u003e\n\u003cp\u003eYou're not buying a table for a printer. You're buying the bench that survives the next three.\u003c\/p\u003e\n\n\u003ch3\u003eShips flat. Assembles with one hex key.\u003c\/h3\u003e\n\u003cp\u003eEvery extrusion arrives cut to final length, deburred, and labeled, with the leg bores already tapped for the feet. The top and shelf come CNC-cut with the mounting holes counterbored. Brackets, T-nuts, and hardware are counted and bagged by step. Flat-pack keeps the freight sane and keeps the price honest — you're paying for aluminum and precision, not for air in a box.\u003c\/p\u003e\n\u003cp\u003eAssembly is straightforward and takes one person about an hour. No welding, no drilling, no cutting. If you can build the enclosure, you can build this.\u003c\/p\u003e\n\n\u003ch3\u003eMade in Rocklin, California\u003c\/h3\u003e\n\u003cp\u003eCut, kitted, and shipped by the same shop that makes your enclosure. Same tolerances, same people, same phone number when you have a question. Backed by our 100% satisfaction guarantee and a 1-year warranty against manufacturer defects.\u003c\/p\u003e\n\n\u003chr\u003e\n\u003cp\u003e\u003cem\u003eNot running a Neptune 4 Max? We build these for any enclosure in our catalog, and for machines that aren't. Send us your model and we'll confirm the exact footprint, height, and load rating before you order.\u003c\/em\u003e\u003c\/p\u003e","brand":"Clearview Plastics","offers":[{"title":"Default Title","offer_id":49519958425838,"sku":"CVP-TBL-N4MAX","price":1079.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0415\/4661\/2904\/files\/Screenshot2026-08-31134051_f85a0b21-a57b-42b6-a463-da09aedcbcb7.png?v=1788209985","url":"https:\/\/clearviewplastic.com\/products\/elegoo-neptune-4-max-enclosure-table-workstation-stand","provider":"Clearview Plastics","version":"1.0","type":"link"}