{"product_id":"snapmaker-u1-enclosure-table-guaranteed-fit-workstation-stand","title":"Snapmaker U1 Enclosure Table — Guaranteed-Fit Workstation Stand","description":"\u003ch2\u003eSide doors are only a feature if they open.\u003c\/h2\u003e\n\n\u003cp\u003eThe U1 enclosure carries 19-inch doors on the left and the right panel — full side access to the machine. Then it gets parked in a corner, one door against the wall, and half the reason you bought this enclosure is sealed shut for good.\u003c\/p\u003e\n\n\u003cp\u003eA footprint check isn't a fit check. The base is 24 × 23.5 inches, but the working machine needs swing room on both flanks — and it needs them at a height you can actually reach into, because this enclosure stands 31.5 inches tall on its own.\u003c\/p\u003e\n\n\u003cp\u003eA table that fits the enclosure but kills the doors didn't save you anything. This one is sized for the machine you actually bought: footprint, swing clearance, and a 28-inch height that keeps the top of the enclosure below eye level.\u003c\/p\u003e\n\n\u003ch3\u003eCut to your enclosure. Not to a category.\u003c\/h3\u003e\n\u003cp\u003eThe top extends exactly half an inch past the enclosure on every side. Enough overhang to level, latch, and grip. Not so much that you've bought a piece of furniture you have to find room for.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eU1\u003c\/strong\u003e — 25\" × 24.5\" top, 28\" height. Fits the U1 enclosure at 24 × 23.5 × 31.5 in, with both 19\" side doors free to swing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"font-size:14px;\"\u003e\u003ca href=\"\/pages\/enclosure-table-fitment-guide\"\u003eSee the full enclosure table fitment guide\u003c\/a\u003e for every machine we build for.\u003c\/p\u003e\n\u003cp\u003eBuilt on 40-series black aluminum extrusion with cast corner brackets and M8 hardware — the same structural system used for CNC machine frames and industrial workstations. The top is 3\/4″ melamine: flat, sealed, wipes clean, and won't telegraph a heat cycle the way a raw wood top will.\u003c\/p\u003e\n\n\u003ch3\u003eRated for what's actually on it\u003c\/h3\u003e\n\u003cp\u003eA multi-color machine, its enclosure, and the filament feeding it put steady weight and constant motion on one small footprint. This frame is specified for a \u003cstrong\u003e120 lb working load\u003c\/strong\u003e with margin for motion — because the number that matters isn't what the table holds sitting still, it's what it holds while a fast machine throws mass around on top of it.\u003c\/p\u003e\n\u003cp\u003eFour leveling feet handle a floor that isn't as flat as you think it is. A machine that rocks a millimeter is a machine that ghosts.\u003c\/p\u003e\n\n\u003ch3\u003eThe air you're standing in\u003c\/h3\u003e\n\u003cp\u003eAn enclosure contains fumes and ultrafine particles. It does not make them disappear. If you run ABS, ASA, or nylon, where the exhaust goes and whether the hose reaches a window or a filter without a kink are decisions that get made at the bench, not in the slicer. This frame stays out of the way of both: an open structure that never pinches a hose, T-slot channels on every rail for cable and duct management, and a footprint that lets the enclosure — not the table — decide how much room the 4-inch run gets behind it.\u003c\/p\u003e\n\n\u003ch3\u003eOptional: locking enclosed compartment\u003c\/h3\u003e\n\u003cp\u003eAdd a fully enclosed mid-shelf with clear acrylic panels and a cam lock. Filament, dryers, nozzles, tools, and spares stay visible, dust-free, and \u003cstrong\u003esecured\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIf you run this machine in a classroom, a shared lab, a makerspace, or any shop where more than one person walks past it, you already know why that's on the list. Consumables walk. This is the version of the answer that doesn't involve a plastic bin and hope.\u003c\/p\u003e\n\n\u003ch3\u003eIt outlives the printer\u003c\/h3\u003e\n\u003cp\u003eYour U1 will not be your last machine. Two years from now there's a faster one with a different footprint, and the bench you bought for this one is either the right size by luck or it's scrap. Extrusion doesn't work that way. \u003cstrong\u003eEvery surface of this frame is a mounting rail.\u003c\/strong\u003e Re-drop the T-nuts, move a rail, add a shelf, hang a spool holder, bolt on a monitor arm, restretch it for the next machine. It reconfigures because it was designed to be reconfigured.\u003c\/p\u003e\n\u003cp\u003eYou're not buying a table for a printer. You're buying the bench that survives the next three.\u003c\/p\u003e\n\n\u003ch3\u003eShips flat. Assembles with one hex key.\u003c\/h3\u003e\n\u003cp\u003eEvery extrusion arrives cut to final length, deburred, and labeled, with the leg bores already tapped for the feet. The top and shelf come CNC-cut with the mounting holes counterbored. Brackets, T-nuts, and hardware are counted and bagged by step. Flat-pack keeps the freight sane and keeps the price honest — you're paying for aluminum and precision, not for air in a box.\u003c\/p\u003e\n\u003cp\u003eAssembly is straightforward and takes one person about an hour. No welding, no drilling, no cutting. If you can build the enclosure, you can build this.\u003c\/p\u003e\n\n\u003ch3\u003eMade in Rocklin, California\u003c\/h3\u003e\n\u003cp\u003eCut, kitted, and shipped by the same shop that makes your enclosure. Same tolerances, same people, same phone number when you have a question. Backed by our 100% satisfaction guarantee and a 1-year warranty against manufacturer defects.\u003c\/p\u003e\n\n\u003chr\u003e\n\u003cp\u003e\u003cem\u003eNot running a U1? We build these for any enclosure in our catalog, and for machines that aren't. Send us your model and we'll confirm the exact footprint, height, and load rating before you order.\u003c\/em\u003e\u003c\/p\u003e","brand":"Clearview Plastics","offers":[{"title":"Default Title","offer_id":49519959605486,"sku":"CVP-TBL-U1","price":929.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0415\/4661\/2904\/files\/Screenshot2026-08-31134051_f85a0b21-a57b-42b6-a463-da09aedcbcb7.png?v=1788209985","url":"https:\/\/clearviewplastic.com\/products\/snapmaker-u1-enclosure-table-guaranteed-fit-workstation-stand","provider":"Clearview Plastics","version":"1.0","type":"link"}