{"product_id":"xtool-f1-f2-ultra-window-exhaust-kit","title":"xTool F1 \/ F2 \/ F1 Ultra \/ F2 Ultra Window Exhaust Kit — 200 CFM 4\" Inline Fan, 16 ft Hose, Window Insert","description":"\u003ch2\u003eWindow exhaust kit for the xTool F1 \/ F2 \/ F1 Ultra \/ F2 Ultra\u003c\/h2\u003e\n\u003cp\u003eCarries laser smoke and fumes from the xTool F1 \/ F2 \/ F1 Ultra \/ F2 Ultra out a window instead of into the room you work in. Everything to vent it comes in the box: the machine connector, a 200 CFM 4\" inline fan with speed control, two 8 ft lengths of 4\" flexible hose, and a window insert.\u003c\/p\u003e\n\u003ch3\u003eHow it connects to the xTool F1 \/ F2 \/ F1 Ultra \/ F2 Ultra\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eConnector: 80 mm or 65 mm slip-on coupler.\u003c\/strong\u003e xTool's F-series lasers ship with a rigid exhaust pipe. The coupler slips over the end of that pipe and steps it up to the kit's 4\" hose, so nothing attaches to the laser itself. Choose the coupler by pipe size: the F1 Ultra and F2 Ultra use an 80 mm pipe; the F1 and F2 take the 65 mm coupler. If you're unsure, measure across the outside of the pipe end.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMachine connector:\u003c\/strong\u003e 80 mm or 65 mm slip-on coupler, matched to your machine\u003c\/li\u003e\n\u003cli\u003e200 CFM 4\" inline fan with speed control\u003c\/li\u003e\n\u003cli\u003e2 × 8 ft of 4\" flexible exhaust hose (cuts to length with a razor blade)\u003c\/li\u003e\n\u003cli\u003eHose clamps\u003c\/li\u003e\n\u003cli\u003eWindow insert for windows up to 36\" wide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy vent it outside\u003c\/h3\u003e\n\u003cp\u003eCutting and engraving turn material into smoke, VOCs and fine particulate. Ducting carries them out of the building instead of letting them hang in the room and settle on everything in it.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"960\" height=\"560\" src=\"https:\/\/www.youtube.com\/embed\/2Kz68a_11ek\" title=\"Clearview exhaust kit setup\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"960\" height=\"560\" src=\"https:\/\/www.youtube.com\/embed\/dOK7sykKqKg\" title=\"Clearview exhaust kit install\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdetails\u003e\u003csummary\u003eDoes the kit modify the xTool?\u003c\/summary\u003e\u003cp\u003eNo. The coupler slips over the end of the exhaust pipe that came with your laser.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhich coupler do I need?\u003c\/summary\u003e\u003cp\u003eF1 Ultra and F2 Ultra: 80 mm. F1 and F2: 65 mm. Not sure? Measure across the outside of the exhaust pipe end, or send us a photo and we'll match it.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWhere does the inline fan go?\u003c\/summary\u003e\u003cp\u003eBetween the two hose runs, as close to the window as the hose allows. With the fan near the outlet, the hose running back to the machine stays under negative pressure, so any small gap pulls air in rather than pushing fumes out.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eWill the window insert fit my window?\u003c\/summary\u003e\u003cp\u003eThe included insert fits windows up to 36\" wide. For a wider window, ask us about the large insert for 30\" to 48\" openings.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCan I shorten the hose?\u003c\/summary\u003e\u003cp\u003eYes. Each 8 ft length cuts cleanly with a razor blade. Shorter, straighter runs move more air.\u003c\/p\u003e\u003c\/details\u003e\n\u003cp\u003e\u003cem\u003eClearview Plastics is not affiliated with or endorsed by xTool. Machine names are trademarks of their owners.\u003c\/em\u003e\u003c\/p\u003e","brand":"Clearview Plastics","offers":[{"title":"80 mm slip-on coupler (F1 Ultra \/ F2 Ultra)","offer_id":50044513288430,"sku":"CV-EXK-XTF-080","price":289.0,"currency_code":"USD","in_stock":true},{"title":"65 mm slip-on coupler (F1 \/ F2)","offer_id":50044516073710,"sku":"CV-EXK-XTF-065","price":289.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0415\/4661\/2904\/files\/Exhaust-kit.jpg?v=1767385327","url":"https:\/\/clearviewplastic.com\/products\/xtool-f1-f2-ultra-window-exhaust-kit","provider":"Clearview Plastics","version":"1.0","type":"link"}