{"product_id":"xtool-o1-omni-to-ap2-air-purifier-slip-on-reducer","title":"xTool O1 Omni to AP2 Air Purifier Slip-On Reducer Adapter","description":"\u003cp\u003e\u003cstrong\u003eThe xTool O1 Omni to SafetyPro AP2 Slip-On Reducer joins your O1 Omni UV printer's exhaust to the intake of the xTool AP2 air purifier in one push.\u003c\/strong\u003e No hose clamp to tighten, no screwdriver, no tape. It slides on, it stays on, and it comes off in seconds when you need to move the purifier or change a filter.\u003c\/p\u003e\n\n\u003cp\u003eThe O1 Omni and the AP2 are made by the same company, and they still don't meet each other directly — the exhaust and the intake are different diameters. This reducer closes that gap with a single tapered transition, so the air your printer pushes out goes into the filter instead of into your room.\u003c\/p\u003e\n\n\u003ch2\u003eWhy the connection is the part that matters\u003c\/h2\u003e\n\u003cp\u003eUV-curable inks are acrylate-based. The O1 Omni moves that air out the back of the machine, and the AP2 is built to catch it — but only what actually reaches it. Every gap at a joint is a spot where exhaust leaks back into the room you are working in, upstream of the filter you paid for. A purifier is only as good as the fitting in front of it.\u003c\/p\u003e\n\u003cp\u003eA tight slip fit does two jobs at once: it holds the purifier on without hardware, and it removes the leak path a loose or improvised connection leaves behind.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you get\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool-free, slip-on install.\u003c\/strong\u003e Press one end onto the O1 Omni exhaust, press the other onto the AP2 intake. Setup takes under a minute.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurpose-built for this pair.\u003c\/strong\u003e Sized for the xTool O1 Omni exhaust and the xTool SafetyPro AP2 intake — not a universal duct reducer you have to shim or tape.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmooth tapered transition.\u003c\/strong\u003e A gradual cone between the two diameters instead of a hard step, so airflow isn't choked at the joint and the AP2 can do the work it was designed for.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinted in PETG.\u003c\/strong\u003e Holds its shape in warm exhaust air and stays tough where PLA goes brittle over time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemoves in seconds.\u003c\/strong\u003e Pull it free to service the AP2 filters or reposition your setup. Nothing to unscrew, nothing to lose.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in Rocklin, California\u003c\/strong\u003e by Clearview Plastics, the shop that builds the O1 Omni enclosure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRunning the O1 Omni inside a Clearview enclosure?\u003c\/h2\u003e\n\u003cp\u003eThe reducer works the same way with the printer enclosed. Pair it with the \u003ca href=\"\/products\/xtool-o1-omni-uv-printer-enclosure\"\u003exTool O1 Omni UV Printer Fume Control Enclosure\u003c\/a\u003e to contain ink and cleaning-fluid odor around the whole machine, keep dust off the printheads, and send the exhaust through the AP2.\u003c\/p\u003e\n\u003cp\u003eVenting outdoors instead of filtering? Our \u003ca href=\"\/products\/laser-engraver-exhaust-ducting\"\u003eexhaust ducting, reducers and elbows\u003c\/a\u003e take you from the printer to a window.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnects:\u003c\/strong\u003e xTool O1 Omni UV printer exhaust port → xTool SafetyPro AP2 air purifier intake\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible printers:\u003c\/strong\u003e xTool O1 Omni (single UV, dual UV, and UV \u0026amp; DTF editions)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible purifier:\u003c\/strong\u003e xTool SafetyPro AP2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PETG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Slip-on friction fit, no tools, no clamps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e One reducer. The O1 Omni and AP2 are not included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the xTool AP2 work with the O1 Omni?\u003c\/h3\u003e\n\u003cp\u003eYes. xTool lists the O1 Omni as compatible with the SafetyPro AP2 air purifier. This reducer gives you a direct, tool-free connection between the printer's exhaust and the purifier's intake.\u003c\/p\u003e\n\u003ch3\u003eDo I need any tools or tape?\u003c\/h3\u003e\n\u003cp\u003eNo. Both ends are sized for a snug slip fit. Push it on, and it holds.\u003c\/p\u003e\n\u003ch3\u003eWill it reduce airflow?\u003c\/h3\u003e\n\u003cp\u003eThe taper is a gradual cone between the two diameters, not a sharp step, which keeps the transition from becoming a restriction at the joint.\u003c\/p\u003e\n\u003ch3\u003eCan I still vent outside instead?\u003c\/h3\u003e\n\u003cp\u003eYes. If you would rather exhaust to a window, use standard ducting from the O1 Omni exhaust. See our \u003ca href=\"\/products\/laser-engraver-exhaust-ducting\"\u003eexhaust ducting\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWho makes it?\u003c\/h3\u003e\n\u003cp\u003eClearview Plastics, a fabrication shop in Rocklin, California building enclosures and ventilation hardware for desktop machines. Clearview is not affiliated with xTool. xTool, O1 Omni and SafetyPro are trademarks of their respective owner, used here only to describe fit.\u003c\/p\u003e\n","brand":"Clearview Plastics","offers":[{"title":"Default Title","offer_id":49768211120366,"sku":"CVP-O1-AP2-RED","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0415\/4661\/2904\/files\/xtool-o1-omni-to-ap2-slip-on-exhaust-reducer.webp?v=1792084007","url":"https:\/\/clearviewplastic.com\/products\/xtool-o1-omni-to-ap2-air-purifier-slip-on-reducer","provider":"Clearview Plastics","version":"1.0","type":"link"}