Anycubic Kobra 3 entry-level Enclosure starter Kit - A great project to upgrade your first printer.

Anycubic Kobra 3 entry-level Enclosure starter Kit by Clearview Plastics is designed to be easy, protect your 3D printing workspace and look great. This kit comes with the panels and hardware that you need for delivery. Just print the presliced STLs with about 1 roll of filament and assemble.

We made this kit low cost so it doesn't break the bank and it is made in the USA. Don't get a flimsy, unsightly grow tent. This is the best bang for your buck to start your 3D printing journey.

Why $199 Works (and why we’re doing it)

• The Anycubic Kobra 3 crowd is budget-conscious — we get it.

• Grow tents are ugly, floppy, and barely contain fumes.

• Every other acrylic enclosure starts at $300+ and climbs fast.

• You shouldn’t have to spend more on the enclosure than on the printer itself.

So we said yes to volume, no to options, and slashed the price to $199 while we still can. When this run sells out, the price goes back up.

Add to cart now → $199 → Done.
No promo code needed. No Black Friday wait. The lowest price we’ll ever offer on a real acrylic Anycubic Kobra 3 enclosure is right here, right now.

Grab yours before the batch disappears.

The enclosure size is 19.5" Wide x 23.5" Deep x 23.75" Tall. We've tested it to fit the Anycubic Kobra 3 and it works with the AMS lite set to the side sitting outside.

What's Included:

• Panels:
  • Base Option: 1/8" thick, optically clear acrylic panels for a clear view of your print progress, with a 5-sided design for optimal protection.

• Printed Parts Kit: Included STL files allow you to print your own parts or opt for our pre-printed Black PETG parts for immediate assembly. No hard modifications required; just a simple plug-and-play system. With the printed parts, this kit provides everything required to set up your enclosure.

Assembly Instructions

• Air Filtration Options:
  • Exhaust HEPA Filter with charcoal, expelling contaminants outside your workspace.

Who We've Worked With

More About the Clearview Infinity Enclosure

Our main objective was to give your printer an unobstructed view from any angle. At the same time, our enclosures offer easy access with a magnetically latched front door and a cable port to route all your connections. Last, the side access door is perfectly placed to access the USB port and power switches.

We also have adapted options for our Carbon Air Scrubbing filter and vibration dampening feet. Both do as they suggest. The Carbon Air Scrubbing Filter uses a silent fan to pass air through a carbon filter to reduce fumes created from the 3D printing process. Especially if you are printing ABS, you will want to include that option. Our Vibration Dampening Feet use a multi material lamination that dissipates vibrations at 5 different levels. If you are printing in an area where printing noise needs to be reduced, this is an essential addition to your 3D printing setup.

We offer a a black/white color option for the brackets and fittings for your printer. With your purchase, we also offer STL access to these files so that you can print these fittings in the colors you want. ADDITIONALLY, with your purchase, we also offer the STL files of future attachments and accessories for your enclosure. If we come up with a mod, you get access to it for free!

This makes a great gift for the 3D printing tinkerer within your friends or family.
If you've had problems with parts adhering to the print bed, warping, bad smell, noise, or dust; a Printer enclosure is the right answer for you.

While 3d Printing is a fun, productive activity, do note there are nascence factors.
-It can be loud if you are printing at home.
-Drafts of air or changes in temperature can lead to warping, print issues, and poor adhesion to the print surface.
-You are working with molten plastics that are known to release VOCs into the air that contain chemicals that are unhealth especially for kids.

Our Prusa 3D printer enclosure is the perfect compliment for setting up a safe, productive 3D printing environment with a great look. This printer enclosure includes all the parts you need to assemble (it takes about 30 minutes and we provide instructions) to work with your existing Prusa i3 mk2 or later 3d Printer. The front door access provides generous room to access your print bed and printer control panel. We also include a specialized rubber grommet to fit your power cable and USB into the enclosure. Last, we include PETG parts and hardware for final assembly so you can get printing!

Need more information on printing with enclosures? Check these links:

• Benefits of printing with an enclosure
• 3D printing health Government guidelines
• Additional Health studies
• Getting Better prints with an enclosure

We have set up a few buying options to fit your needs:
1 - Enclosure kit - Includes all the parts you need to setup your enclosure including hardware, printed parts, magnets, and commercial grade acrylic panels.
2 - Enclosure kit with Feet - Includes the enclosure kit above plus a set of 4 vibration dampening feet we developed to help dissipate vibrations that travel through floors and walls.
3 - Enclosure kit with Carbon Filter - Our carbon activated air filter is nearly silent, air scrubbing filter that reduces fumes and smells from printing in doors for those in sensitive environments.
4 - Panels and hardware Only + You print parts: This option is great if you want to print in your own colorway. We'll send you the panels and hardware (screws + magnets) and STL file for you to print the parts.


Need a different size or style to fit your print setup? No problem. We can build an enclosure for your printer. Just DM us and tell us about your printer or desired dimensions.

**BONUS** as the 3d print world changes, so does our enclosure. We'll give you access to download stl updates to our parts database. This allows you to print updates addons, and mods for free!

FAQ

What is your return Policy?

We have a 30 day return policy. Unused, undamaged panels that still have the masking fully attached are eligible for a full refund less return shipping. If panels are damaged (after shipment) or the protective mask layer has been removed, we cannot offer a refund. For best results in ensuring fitment and to ensure you like the setup of our enclosures consider at least partially assembling with the mask on. If you find out it isn't for you, this allows to get the return for a full refund.

There are some differences between your product pictures. 

We update these often and as a small business it isn't realistic to do a fresh photoshoot for every iteration. In general function is always constant or better as we improve things. For the clearest indication of our current version, please rely on the renderings rather than the photos.