Bambu Lab X1C / P1S / P1P / P2S / X2D Printer Stand — Shelving & Storage Rack with Slide-Out Deck, 12-Spool Drawer and AMS Shelf

Everything you need to reach is on the back of the printer.

The power switch. The USB port. The PTFE tube and the AMS hub cable. The exhaust. Bambu put all of it on the rear panel, so your X1C or P1S lives with its back to the wall — and every time you need one of those things you drag a thirty-pound machine across the bench, scuff its feet, tug the cables, and disturb a printer you just leveled.

None of that is the printer’s fault. The same is true of the ringing you have been tuning out of your prints: a CoreXY throws its toolhead through thousands of direction changes an hour, and a hollow side table hands that energy straight back to the toolhead.

A printer this capable needs a workstation to match: stow-and-go storage that works the way the printer works — spools under it, AMS above it, and the back of the machine a pull away.

The printer comes to you

The deck the printer sits on rides on heavy-duty locking slides. Pull it forward and the whole machine clears the cabinet — rear panel, power switch, cables, and the top lid. Change a spool path, plug in a drive, clear the purge, close the lid, push it back. The printer never leaves its footprint and never gets lifted.

Twelve spools, one drawer

Under the printer is a full-width drawer on soft-close slides, sized for up to twelve spools. The slot in the drawer face shows you what is in there without opening it. Filament stays where the printer is, not in a tote across the room.

AMS on top. Lit underneath.

The cabinet top is the AMS shelf, with a short, straight feed path down to the printer. A 12 V LED strip under the top edge lights the build plate and the front of the machine — useful at 2 a.m. when a first layer is not sticking, and it makes the whole station read as finished.

Half-inch Baltic birch. No glue.

Every panel is cut from prefinished 1/2" (12 mm) Baltic birch — nine void-free plies with a good face veneer, UV-cured on both faces at the mill so it arrives finished. It goes together with dowels and cabinet screws using a screwdriver or a hex key. No glue, no clamps, no wood filler, no sanding, no finish to apply. The exposed ply edge is the look, not a shortcut.

Stiff, heavy plywood is also why this base behaves. Wood damps vibration where a thin steel rack rings, and a cabinet with a wider footprint than the printer is harder to rock than one that matches it.

Sized for the X1C, P1S, P1P, P2S and X2D

One cabinet covers the whole 389–392 mm Bambu family with the AMS on top. Overall footprint 600 mm × 600 mm (23.6 × 23.6 in), 895 mm (35.2 in) tall to the AMS shelf. Stackable for a print farm.

Wheels, or feet

Ships with leveling feet. Choose the locking-caster option to roll it — to the other side of the shop, to the next classroom, out from the wall — and lock all four before you print. Casters that lock are the difference between a portable printer and a wobbly one.

What’s in the box

• CNC-cut prefinished Baltic birch panels
• Slide-out printer deck on heavy-duty locking slides
• 12-spool drawer on soft-close slides
• LED lighting kit with power supply
• Leveling feet
• Dowels, cabinet screws and hardware, bagged by step
• Printed instructions

Not included: the printer, the AMS, filament, casters (optional) and the enclosure (a separate Clearview product). The renders show them for scale. Standard kits ship in 10 business days or less.

Made in Rocklin, California

Cut, kitted and shipped by the same shop that makes your enclosure. Built in the USA. 100% satisfaction guarantee and a 1-year warranty against manufacturer defects.

Running an H2D, H2S or H2C? That one is a bigger cabinet — see the Bambu Lab H2 Series Printer Stand. Running something else? Send us the model.

FAQ

What is your return policy?
We have a 30 day return policy. Unused, undamaged kits are eligible for a full refund less return shipping. Kits that have been assembled or show wear cannot be refunded. If you are unsure about fit, dry-fit the deck and drawer before you drive the screws home.

There are some differences between your product pictures.
We update the design often and do not reshoot for every iteration. Function is always constant or better as we improve things. For the clearest indication of our current version, rely on the renderings rather than the photos.