Trusted by engineers, scientists & manufacturers at
Lockheed Martin
Amazon
Apple
Meta
Samsung
MIT
Walt Disney Co.
Tesla
Toyota
Volkswagen
John Deere
Procter & Gamble
Home Depot
Corning
Hologic
Analog Devices
Molex
Red Hat
Cricut
Oak Ridge Nat'l Lab
Pacific Northwest Nat'l Lab
Jefferson Lab
MIT Lincoln Lab
NOAA
U.S. Air Force
U.S. Navy
U.S. Army
U.S. Marine Corps
Blue Origin
Sierra Nevada Corp.
Collins Aerospace
L3Harris
General Dynamics
Rolls-Royce
Kitty Hawk
BAE Systems
Booz Allen Hamilton
CACI
Northrop Grumman
Figure
GSK
Takeda
U. of Michigan
U. of Florida
Texas A&M
UT Austin
Northeastern
NC State
U. of Iowa
U. of Edinburgh
Lockheed Martin
Amazon
Apple
Meta
Samsung
MIT
Walt Disney Co.
Tesla
Toyota
Volkswagen
John Deere
Procter & Gamble
Home Depot
Corning
Hologic
Analog Devices
Molex
Red Hat
Cricut
Oak Ridge Nat'l Lab
Pacific Northwest Nat'l Lab
Jefferson Lab
MIT Lincoln Lab
NOAA
U.S. Air Force
U.S. Navy
U.S. Army
U.S. Marine Corps
Blue Origin
Sierra Nevada Corp.
Collins Aerospace
L3Harris
General Dynamics
Rolls-Royce
Kitty Hawk
BAE Systems
Booz Allen Hamilton
CACI
Northrop Grumman
Figure
GSK
Takeda
U. of Michigan
U. of Florida
Texas A&M
UT Austin
Northeastern
NC State
U. of Iowa
U. of Edinburgh
Description
xClearview Plastics · Creality HALOT-X1 Max Resin 3D Printer Enclosure V2.0
Cleaner workflow.
Healthier air.
Better prints.
A quieter studio.
A resin printer in a shared workplace has two jobs: produce consistent parts, and keep its fumes out of everyone else's air. The HALOT-X1 Max brings its own air purifier and chamber heater, and both work inside the printer. The rest of the job happens around it. The lid opens to load resin and pull parts, wet prints travel to the wash, the wash adds solvent vapor, and the room's temperature swings and noise are still the room's.
The Clearview enclosure puts the HALOT-X1 Max in a finished, controlled station designed around the way you already work, with the printer and your wash and cure stations enclosed to isolate fumes. A filter or exhaust deals with what's contained, the printer gets a steadier space to work in, and the noise comes down. It's a panel kit CNC-routed in California, flat-packed or delivered assembled and tested.
Four reasons to enclose it
01 — WORKFLOW
Keep a good workflow
Thoughtfully designed enclosures that don't interfere with the way your work already flows. The printer and the wash and cure stations are all enclosed to isolate fumes. Frameless doors open where you already reach, so nothing has to be worked around. The station reads as production equipment, not a hobby corner.
02 — HEALTHIER
Resin fumes and solvent vapor stay isolated
A built-in purifier treats the air inside the printer. It doesn't cover the moment the lid opens, the wet parts on their way to the wash, or the wash itself. The enclosure isolates all of it, so a filter can reduce it or an exhaust run can carry it outside, away from the people you're responsible for.
03 — BETTER PRINTS
A stable temperature for a temperature-sensitive process
Resin thickens when it's cold and changes behavior when the room swings through the day, overnight or with the HVAC schedule. The X1 Max heats its own chamber. The enclosure gives that heater a still, defined space around the printer instead of a drafty room. It also keeps dust off the vat, the film and the build plate. Consistent conditions mean consistent parts.
04 — QUIETER
Keep the machine out of the conversation
Fans, Z motors and wash cycles running through the day add up in a shared room. Panels on every side take the edge off, so the printer works in the background while the people around it don't have to hear it.
And then you open the door
A sealed box with nothing moving the air just stores fumes until you open it, then releases them into the room all at once. That's why these enclosures aren't gasketed. The filter or exhaust keeps air moving through the enclosure the whole time, so the air inside is being treated, not saved up for the moment the door opens.
Who it's built for
Built for work where the result matters.
THE PARTS
When the parts matter
One-piece figures, miniature production runs, footwear and elastomer prototypes, and tooling-free batches, where a failed overnight run costs a day, not just resin.
THE PEOPLE
When people share the air
Staff who work next to the printer every day, and clients or colleagues in the next room.
THE ROOM
When the room has standards
A studio, lab or shop that has to answer to an EHS review, and can't take in solvent vapor or machine noise.
Fortune 500 companies, government labs and top universities run Clearview enclosures. So do physicians, attorneys, executives and senior engineers.
If your practice or lab answers to a safety review, the five-document Safety Documentation Pack is written for exactly that conversation.
The Creality HALOT-X1 Max is a large-format production machine, and it usually lives in a room people work in all day. Its built-in purifier and chamber heater work inside the printer. Everything around it is open air. Uncured resin and IPA both give off vapor, and it doesn't stay over the vat. It moves through the room and settles on everything around the bench. Room light reaches the vat, and dust reaches wet prints before you've had a chance to wash them. This enclosure puts a boundary around the machine and the workflow next to it.
What you get
The Clearview SLA V2.0 enclosure in the XL+ size, our recommended size for the HALOT-X1 Max. It is a bolt-on panel kit: panels, hardware, and a printed parts kit. Screw-together assembly in 60 to 120 minutes. No fabrication, and no hard mods to the printer itself.
- Hinged front door, 20.5" (520 mm) wide, with printed magnetic door stops
- Top hatch that opens to the panel edge
- Ports on a 120 mm fan mounting pattern. The 4" exhaust hose bracket is included.
- Rubber cable grommet for power and USB
- Side doors available on one or both sides
- Black or white printed part colorway
- STL repository access after ordering, including future revisions
The frameless door design
On this enclosure the front door swings flat against the side and the top hatch lifts clear at the back. Where the two meet, the corner opens as one piece, with no frame rail standing in the way. Loading resin, swapping the vat and pulling the build plate all happen through that open corner, and a lid that lifts can rise past the top of the enclosure rather than needing headroom inside it.
Size to the printer with the lid closed. The lid never has to fit inside. Then check the door width against the build plate and anything else that has to come out the front. That is the number that decides whether things come out cleanly.
XL+ dimensions
| Overall | 25.5" x 24" x 32.5" (647.7 x 609.6 x 825.5 mm) |
|---|---|
| Front door width | 20.5" (520 mm) |
Panel material options
- 1/4" clear acrylic is the standard. Optically clear, full view of the plate from any angle.
- 1/4" smoked tint acrylic cuts the light coming in without going opaque.
- 1/4" heavy duty polycarbonate (clear) is the one to pick if IPA is in the picture. Holds up to wash-station splash and repeated wipe-down better than acrylic.
- 1/4" UV blocking amber acrylic blocks ambient UV from reaching the vat.
Air management
The enclosure's job is to contain and concentrate what comes off the machine. The fan or filter does the mitigating. Two parts, working together. The 4" exhaust hose bracket is included, and everything below mounts to it.
- Duct it outside with the 200 CFM high output fan with speed control, or the 4" inline fan exhaust kit. Pair with the window exhaust insert, a blast gate, and 4" flexible hose.
- 95 CFM exhausting carbon/HEPA filter reduces fumes and smells.
- Recirculating carbon/HEPA filter reduces fumes and smells. Stays on the bench, no window needed.
- Print Pro 3 by Donaldson gives higher volume filtration capacity. For rooms where that is the requirement, not the preference.
Kit, or assembled and ready to run
The enclosure ships flat-packed by UPS as a kit. If you would rather not build it, we can assemble and test it here so it arrives ready to run. Assembled enclosures ship on a pallet by freight.
For the people who have to sign off on it
Studios, labs and production shops often can't install equipment without documentation on file. The resin safety and compliance document pack is five editable documents: Safety and Compliance Package, Ventilation and Exhaust Guide, Room Readiness Guide, Maintenance and Inspection Guide, and Visitor and Student Safety Orientation.
Designed and built in house in California. One-year warranty against manufacturer defects. 30 day returns on unused panels with the masking still attached. Printed parts and STL files supported after ordering, including future revisions.
Shipping & Return
xReturns Policy
-Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange. -To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging. -We reserve the right to charge a 20% restock fee for parts that are no longer in new condition. These examples apply: Acrylic Panels that have had the protective mask peel off. Fans and filters that have been used before return. -Custom items are not available for return -Shipping charges from returning the item and charges for shipping the order out that were paid by Clearview will be deducted from the order's final refund. Additional non-returnable items: * Gift cards * Downloadable software products * Some health and personal care items To complete your return, we require a receipt or proof of purchase. Please do not send your purchase back to the manufacturer. There are certain situations where only partial refunds are granted: (if applicable) * Book with obvious signs of use * CD, DVD, VHS tape, software, video game, cassette tape, or vinyl record that has been opened. * Any item not in its original condition, is damaged or missing parts for reasons not due to our error. * Any item that is returned more than 30 days after delivery Refunds (if applicable) Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund. If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days. Late or missing refunds (if applicable) If you haven’t received a refund yet, first check your bank account again. Then contact your credit card company, it may take some time before your refund is officially posted. Next contact your bank. There is often some processing time before a refund is posted. If you’ve done all of this and you still have not received your refund yet, please contact us at contact@clearviewplastic.com. Sale items (if applicable) Only regular priced items may be refunded, unfortunately sale items cannot be refunded. Exchanges (if applicable) We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at contact@clearviewplastic.com and send your item to: 4235 Pacific St Ste H, Rocklin, CA, 95677, United States.Shipping
We can ship to virtually any address in the world. International orders include brokerage fees for customs. Duties, VAT, taxes, and other fees may need to be collected prior to delivery. Every country and local is different so we cannot provide an exact estimate of these fees.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Choosing a selection results in a full page refresh.