Creality K2 Plus Enclosure Table — Workstation Stand

Seventy-four pounds, moving at 30,000 mm/s².

The K2 Plus is the heaviest machine in its class before you put anything on it — 33.5 kg, about 74 pounds, of die-cast frame and servo motors. Put the CFS on top, an enclosure around it and a spool bank beside it, and whatever bench it lands on is carrying a lot more than a printer.

Then it moves. Creality rates the K2 Plus at up to 30,000 mm/s² of acceleration, on closed-loop servos that hold position hard. Every direction change pushes back into whatever the machine stands on. A bench that gives a little under that load hands the motion back to the toolhead, and it prints as ripples trailing every corner and every letter.

The servos are doing their job. The question is whether the thing underneath them is doing its.

This is the workspace. A robust aluminum extrusion frame cut to the footprint of the Clearview K2 Plus enclosure, with shelf rails ready for a storage cabinet fitted underneath. Add the cabinet, a keyed lock for it, and locking casters so it rolls between rooms and out from the wall for cleaning. A height set so the door, the top hatch and the CFS sit where your hands and eyes already are. Built to hold a heavy, fast machine still — and ready to take your Clearview K2 Plus enclosure on top, now or later.

Cut to your enclosure. Not to a category.

The top extends exactly half an inch past the enclosure on every side. Enough overhang to level, latch, and grip. Not so much that you’ve bought a piece of furniture you have to find room for.

Both sizes share the same 25.5-inch depth, so they take the same floor space front to back. The XL is wider and taller to carry the CFS inside the enclosure, and it ships on a frame four inches lower — the top of a 38-inch enclosure lands at 64 inches instead of 68, where the hatch is still something you look into rather than reach over.

Both are built on a robust black aluminum extrusion frame with cast corner brackets and M8 hardware — the same structural system used for CNC machine frames and industrial workstations. The top is 3/4″ melamine: flat, sealed, wipes clean, and won’t telegraph a heat cycle the way a raw wood top will.

About these photos, and about the fit

The renderings on this page show the workstation table as a system — frame, top, storage cabinet kit and casters. The cabinet kit and casters are options; the standard table is the open frame with leveling feet. The images are general-fit images used across the table line, not a render of this exact SKU. The geometry is what’s specific to you: the dimensions listed above are the dimensions you receive, and the top is cut to sit half an inch proud of the enclosure on every side — +1″ in width, +1″ in depth, every time.

One note on finish: the renderings show a wood-tone top. Yours ships as 3/4″ edge-banded melamine — the geometry in the images is right, the surface is melamine.

Rated for what’s actually on it

A K2 Plus is about 74 pounds on its own, and a K2 Plus Combo with the CFS is about 85 — before the enclosure, a spool bank, and a large part. This frame is specified for a 150 lb working load with margin for motion — because the number that matters isn’t what the table holds sitting still, it’s what it holds while a fast machine throws mass around on top of it.

Four leveling feet, standard on every table, handle a garage slab that isn’t as flat as you think it is. A machine that rocks a millimeter is a machine that ghosts.

The air you’re standing in

The K2 Plus heats its chamber to 60 °C because it was built to run ABS, ASA, nylon and carbon-fiber blends — the filaments that put styrene, other VOCs and ultrafine particles into the room. An enclosure contains those emissions. It does not make them disappear. Where the exhaust goes, how the intake breathes, and whether the hose has a clean run to a window or a filter — those are workspace decisions, and they get solved at the bench, not in the printer’s settings.

This table is built to be part of that system: an open frame that never pinches a hose, T-slot channels on every rail for cable and duct management, and a footprint sized so the enclosure — not the table — decides how close you can sit to the wall. Give the 4-inch exhaust a clean run behind it and you’re done. If you’re running ABS, ASA, or nylon anywhere near where people sit, this matters more than the print quality argument does.

Option: storage cabinet kit

Every table ships with the shelf rails already in the frame. The storage cabinet kit bolts onto them: a melamine shelf, smoked acrylic back, ends and front, and laser-cut doors on T-slot hinges with pulls and magnetic catches — one door on the Standard, two on the XL. The cabinet is 18.7″ clear on both sizes. Filament, dryers, nozzles, tools and spares stay dust-free and out of sight. Add it with the table or bolt it on later; it uses the same slots.

Option: keyed cam lock

Available with the cabinet kit, keyed alike across your tables. If you run this machine in a classroom, a shared lab, a makerspace, or any shop where more than one person walks past it, you already know why that’s on the list. Consumables walk. This is the version of the answer that doesn’t involve a plastic bin and hope.

Option: locking casters

A set of four in place of the leveling feet. The workstation rolls between rooms and out from the wall for cleaning — a library sharing one printer across programs, a classroom, a shop floor that gets swept — then locks where you leave it. The shelf rail sits low on the legs, so there’s almost no unbraced leg to flex when a caster meets a door threshold. Table height stays the stated height either way.

It outlives the printer

Here’s the part worth thinking about before you compare prices.

Your K2 Plus will not be your last printer. Two years from now there’s a faster machine with a different footprint, and the bench you bought for this one is either the right size by luck or it’s scrap. Extrusion doesn’t work that way. Every surface of this frame is a mounting rail. Re-drop the T-nuts, move a rail, add a shelf, hang a spool holder, bolt on a monitor arm, restretch it for the next machine. It reconfigures because it was designed to be reconfigured.

You’re not buying a table for a printer. You’re buying the bench that survives the next three.

Ships flat. Assembles with one hex key.

Every extrusion arrives cut to final length, deburred, and labeled, with the leg bores already tapped for the feet or casters. The top comes CNC-cut with the mounting holes counterbored, and the shelf rails are already in the frame, ready for the cabinet kit. Brackets, T-nuts, and hardware are counted and bagged by step. Flat-pack keeps the freight sane and keeps the price honest — you’re paying for aluminum and precision, not for air in a box.

Assembly is straightforward and takes one person about two hours. No welding, no drilling, no cutting. If you can build the enclosure, you can build this. Prefer it ready to run? Choose the assembled option and it arrives built.

Made in Rocklin, California

Cut, kitted, and shipped by the same shop that makes your enclosure. Same tolerances, same people, same phone number when you have a question. Backed by our 100% satisfaction guarantee and a 1-year warranty against manufacturer defects.

Not running a K2 Plus? We build these for every enclosure in our catalog, and for machines that aren’t. Send us your model and we’ll confirm the exact footprint, height, and load rating before you order.