Clearview Plastics · UniFormation S10 Fume Control Enclosure
A UV printer works on your air even when it isn't printing. Its automatic cleaning cycles run heavy-solvent fluids overnight, on idle and at startup, ink mist and odor build during every job, and the printhead, the most expensive part of the machine, is at the mercy of the room's dust, temperature and humidity.
The Clearview enclosure puts the UniFormation S10 in a finished, controlled station. Fumes stay contained around the clock so a filter or exhaust can deal with them, dust stays off the media and out of the carriage, and you get a defined space to hold the conditions the printhead was built for with your own humidifier, dehumidifier or heater. It's a panel kit CNC-routed in California.
Four reasons to enclose it
Printer, inks, cleaning fluids and finished pieces in one enclosed station. Customers who walk past see production equipment, not a machine wedged between boxes. Ink mist settles inside the enclosure instead of on your shelves and stock.
UV inks carry a strong odor, and the cleaning fluids are heavy solvents. The printer runs its cleaning cycles on its own schedule, overnight, on idle and at startup, so the fumes don't stop when the printing does. The enclosure contains them around the clock, and a filter can reduce them or an exhaust run can carry them outside.
Dust on the media is a defect in every print, and debris near the head is a clog waiting to happen. The enclosure keeps the print surface and the carriage clean, and buffers the machine from drafts and swings in temperature that change how ink lays down.
The printhead is the most expensive part of the machine, and it performs best and lasts longest within a set temperature and humidity range. The enclosure gives you a defined space to hold that range. Put your own small humidifier, dehumidifier or heater inside and it works on the box, not the whole room. Fewer clogs, fewer head cleanings, and more life out of the part that costs the most to replace.
A sealed box with nothing moving the air just stores fumes until you open it, then releases them into the room all at once. That's why these enclosures aren't gasketed. The filter or exhaust keeps air moving through the enclosure the whole time, so the air inside is being treated, not saved up for the moment the door opens.
Who it's built for
Client orders and production runs, where a reprint or a dead head eats the margin.
Customers in a storefront, employees at the next bench, or family when the shop is at home.
A retail space, a shared studio, or a dusty workshop the printer needs protecting from.
Fortune 500 companies, government labs and top universities run Clearview enclosures. So do physicians, attorneys, executives and senior engineers.
If your practice or lab answers to a safety review, the five-document Safety Documentation Pack is written for exactly that conversation.
In development. UniFormation announced the S10 on September 10, 2026. No price and no sale date have been published — the company is collecting early-bird registrations. We have not had one on the bench in Rocklin, so there is no fitment claim on this page yet.
The S10's headline feature is that it does everything in one box: it prints, then washes the build in a 9-liter tank, then dries it with heat, all before you open the door. That solves the sticky-gloves problem and the second-machine-on-the-bench problem. It does not solve the air problem — it concentrates it.
A conventional resin workflow puts uncured resin in one machine and solvent in another. The S10 puts both in the same cabinet and then adds a heated drying stage. UniFormation lists that stage at 35–45 °C. Warming solvent-wetted parts is an efficient way to move solvent into the air, and that air goes into whatever room the machine sits in. Every time the door opens, the accumulated volume comes with it.
That is the case for a fume control enclosure over the top of it. The machine's enclosure exists to automate a workflow. Ours exists to contain and concentrate what that workflow produces, so a filter or an exhaust run can do the mitigating. Two parts, working together.
Those are the manufacturer's published figures, not measurements we have taken. We will verify every one of them against real hardware before we cut anything.
A bolt-on fume control enclosure in the same line as our DTF and UV printer enclosures: panels, hardware, and a printed parts kit, with exhaust ports on a 120 mm fan mounting pattern and a 4" exhaust bracket that slips a 4" hose with a clamp. No fabrication, no hard mods to the machine.
If you are running a print farm configuration — three S10s on a shared fluid station — tell us when you sign up. A multi-machine layout is a different problem than a single desk, and it is worth knowing early.
No preorders, no deposits, no ship date. We do not publish dimensions or fitment claims for a machine nobody has measured. Every other Clearview listing says cut for this exact machine — that claim is worth something because we do not make it until it is true.
Sign up below. One message when the enclosure is real.
CNC-routed in Rocklin, California.
We can ship to virtually any address in the world. International orders include brokerage fees for customs. Duties, VAT, taxes, and other fees may need to be collected prior to delivery. Every country and local is different so we cannot provide an exact estimate of these fees.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.