Trusted by engineers, scientists & manufacturers at
Lockheed Martin
Amazon
Apple
Meta
Samsung
MIT
Walt Disney Co.
Tesla
Toyota
Volkswagen
John Deere
Procter & Gamble
Home Depot
Corning
Hologic
Analog Devices
Molex
Red Hat
Cricut
Oak Ridge Nat'l Lab
Pacific Northwest Nat'l Lab
Jefferson Lab
MIT Lincoln Lab
NOAA
U.S. Air Force
U.S. Navy
U.S. Army
U.S. Marine Corps
Blue Origin
Sierra Nevada Corp.
Collins Aerospace
L3Harris
General Dynamics
Rolls-Royce
Kitty Hawk
BAE Systems
Booz Allen Hamilton
CACI
Northrop Grumman
Figure
GSK
Takeda
U. of Michigan
U. of Florida
Texas A&M
UT Austin
Northeastern
NC State
U. of Iowa
U. of Edinburgh
Lockheed Martin
Amazon
Apple
Meta
Samsung
MIT
Walt Disney Co.
Tesla
Toyota
Volkswagen
John Deere
Procter & Gamble
Home Depot
Corning
Hologic
Analog Devices
Molex
Red Hat
Cricut
Oak Ridge Nat'l Lab
Pacific Northwest Nat'l Lab
Jefferson Lab
MIT Lincoln Lab
NOAA
U.S. Air Force
U.S. Navy
U.S. Army
U.S. Marine Corps
Blue Origin
Sierra Nevada Corp.
Collins Aerospace
L3Harris
General Dynamics
Rolls-Royce
Kitty Hawk
BAE Systems
Booz Allen Hamilton
CACI
Northrop Grumman
Figure
GSK
Takeda
U. of Michigan
U. of Florida
Texas A&M
UT Austin
Northeastern
NC State
U. of Iowa
U. of Edinburgh
Description
xClearview Plastics · xTool O1 Omni UV Printer Fume Control Enclosure
Cleaner shop.
Healthier air.
Better prints.
Longer printhead life.
The xTool O1 Omni is a production machine: UV, UV DTF and, on the fabric edition, DTG and DTF, all from one desktop chassis. It works on your air the whole time it's switched on. UV ink carries a strong odor, the fluids that clean and moisturize the heads carry their own, and the printheads, the most expensive parts on the machine, sit at the mercy of the room's dust, temperature and humidity.
The Clearview enclosure puts the O1 Omni in a finished, controlled station. Odor and fumes stay contained so a filter or exhaust line can deal with them, dust stays off the media and out of the carriage, and you get a defined space to hold the conditions the heads were built for. It's a panel kit CNC-routed in Rocklin, California, and it ships with an adapter for the xTool SafetyPro AP2.
Four reasons to enclose it
01 — CLEANER
A print shop that looks like one
Printer, inks, cleaning fluids and finished pieces in one enclosed station. Customers who walk past see production equipment, not a machine wedged between boxes. Ink mist settles inside the enclosure instead of on your shelves and stock.
02 — HEALTHIER
Contained during the job, and between jobs
UV ink carries a strong odor, and the fluids that clean and moisturize the heads add their own. The odor doesn't stop when the print does: ink sits in the lines and fluid sits at the capping station around the clock. The enclosure contains it, and a filter can reduce it or an exhaust run can carry it outside.
03 — BETTER PRINTS
Clean media, steady conditions
Dust on the media is a defect in every print, and debris near the head is a clog waiting to happen. The enclosure keeps the print surface and the carriage clean, and buffers the machine from drafts and swings in temperature that change how ink lays down.
04 — LONGER PRINTHEAD LIFE
Protect the parts that cost the most
The O1 Omni runs Epson F1080 heads: one on the Single UV edition, two on the Dual-Head UV and UV + DT Fabric editions. They perform best and last longest inside a set temperature and humidity range. Put a small humidifier, dehumidifier or heater inside and it works on the box, not the whole room. Fewer clogs, fewer head cleanings, and more life out of the parts that cost the most to replace.
And then you open the door
A sealed box with nothing moving the air just stores fumes until you open it, then releases them into the room all at once. That's why these enclosures aren't gasketed. The filter or exhaust keeps air moving through the enclosure the whole time, so the air inside is being treated, not saved up for the moment the door opens.
Who it's built for
Built for work where the result matters.
THE PARTS
When the parts matter
Client orders and production runs, where a reprint or a dead head eats the margin.
THE PEOPLE
When people share the air
Customers in a storefront, employees at the next bench, or family when the shop is at home.
THE ROOM
When the room has standards
A retail space, a shared studio, or a dusty workshop the printer needs protecting from.
Fortune 500 companies, government labs and top universities run Clearview enclosures. So do physicians, attorneys, executives and senior engineers.
If your shop, school or lab answers to a safety review, the five-document UV Printer Safety Documentation Pack is written for exactly that conversation.
xTool O1 Omni UV Printer Fume Control Enclosure
This enclosure sets over the xTool O1 Omni and its working area to contain ink and cleaning-fluid odor, keep dust off the media and the printheads, and give a filter or exhaust line one place to pull from. No drilling, no modification to the machine.
It fits all three editions: Single UV, Dual-Head UV, and UV + DT Fabric. They share one chassis, 714 × 374 × 468.5 mm (28.1″ × 14.7″ × 18.4″) and roughly 90 lb.
What's on it
- xTool SafetyPro AP2 adapter, included. The adapter bracket takes the AP2's 80mm hose straight onto this enclosure's exhaust port. If you already run an AP2 on an xTool laser, there's no second purifier to buy.
- Top lid hatch. A hinged hatch with a pull handle sits over the O1's own lid, so you open the printer from above without lifting or unbolting the enclosure.
- Access doors for loading media, setting up the rotary, and reaching the cartridges and maintenance points.
- Sliding air inlet covers you open and close to give an exhaust the makeup air it needs.
- Multiple exhaust port locations, with covers included for the ports you don't use.
Size and fit
31″ W × 44″ D × 21″ H (785 × 1115 × 535 mm). The width takes the 28.1″ printer with room at the sides. The depth is the point: the O1's bed travels front to back, and this enclosure is sized so it does that inside the box, with working room for the rotary and roll-fed accessories.
Will it fit your table?
| Enclosure (W × D × H) | Min. table top (W × D) | Min. load rating |
|---|---|---|
| 31″ × 44″ × 21″ 785 × 1115 × 535 mm |
33″ × 46″ | 200 lb |
- It's 44″ deep, deeper than almost any stock desk or workbench. Measure your surface before ordering, or plan a deeper top.
- The load rating covers everything on the table: the printer at roughly 90 lb, the enclosure, ink, and accessories.
- Leave room above for the top hatch to swing open, and room behind for the exhaust. Don't push it tight against a wall.
Panel material
1/4″ clear acrylic is the base option. 1/4″ UV-blocking amber is the upgrade, and the pick if kids, pets or customers are near the printer, or if you're sensitive to UV light. Optical spectroscopy on our 6mm (1/4″) amber stock measured transmittance at 0.16% below 400nm and 0.11% below 450nm.
Air management
The enclosure's job is to contain. The filter or the duct does the rest. Concentrated in a box, odor and fumes can be absorbed by a filter or carried out of the room. Loose in the air, they can't be.
Pick the port location that suits your bench and cover the ones you don't use. Already own an AP2? Its 80mm hose goes straight onto the included adapter bracket and you're done. Open the sliding inlets so the exhaust has makeup air to pull; closed inlets choke the airflow. From there, duct out a window, run to a carbon filter with no window needed, or move air with a fan on the port. The 95 CFM fan is the right default for this enclosure. Step up to 200 CFM for long duct runs or a window kit with several bends.
Optional accessories
6th base panel, rear access door, HD hardware upgrade (metal hinges, hex binding screws, metal door pulls), LED lighting, window exhaust kit, blast gate, 95 or 200 CFM fan, 90° elbow, 4″ to 3″ reducer, and a USB camera.
Shipping and lead time
First units ship October 21, 2026. After that, standard lead time is 10 business days. It ships as a flat-pack panel kit and assembles with a Phillips screwdriver and a 2.5mm hex wrench.
Fit and support
Cut for the xTool O1 Omni specifically, not a universal cover. Designed around the doors it opens, the accessories it runs, and the room it needs to run them.
CNC-routed in Rocklin, California. One-year warranty against manufacturer defects.
Every printed part is in the file repository you get after ordering. If one breaks or gets revised, print a new one.
Questions
Will it fit my edition of the O1 Omni?
Yes. Single UV, Dual-Head UV and UV + DT Fabric all use the same chassis.
Can I use the xTool AP2 air purifier I already own?
Yes. The AP2 adapter comes with the enclosure and connects your purifier to the exhaust port.
Will the exhaust affect my prints?
Our fans have speed control, so you set how much air moves through the enclosure. Every workspace is different, so expect a little adjustment to balance fume removal with print performance.
What is your return policy?
30 days. Unused, undamaged panels with the protective masking fully attached are eligible for a full refund, less return shipping. If panels are damaged after shipment or the masking has been removed, we can't offer a refund.
Shipping & Return
xReturns Policy
-Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange. -To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging. -We reserve the right to charge a 20% restock fee for parts that are no longer in new condition. These examples apply: Acrylic Panels that have had the protective mask peel off. Fans and filters that have been used before return. -Custom items are not available for return -Shipping charges from returning the item and charges for shipping the order out that were paid by Clearview will be deducted from the order's final refund. Additional non-returnable items: * Gift cards * Downloadable software products * Some health and personal care items To complete your return, we require a receipt or proof of purchase. Please do not send your purchase back to the manufacturer. There are certain situations where only partial refunds are granted: (if applicable) * Book with obvious signs of use * CD, DVD, VHS tape, software, video game, cassette tape, or vinyl record that has been opened. * Any item not in its original condition, is damaged or missing parts for reasons not due to our error. * Any item that is returned more than 30 days after delivery Refunds (if applicable) Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund. If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days. Late or missing refunds (if applicable) If you haven’t received a refund yet, first check your bank account again. Then contact your credit card company, it may take some time before your refund is officially posted. Next contact your bank. There is often some processing time before a refund is posted. If you’ve done all of this and you still have not received your refund yet, please contact us at contact@clearviewplastic.com. Sale items (if applicable) Only regular priced items may be refunded, unfortunately sale items cannot be refunded. Exchanges (if applicable) We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at contact@clearviewplastic.com and send your item to: 4235 Pacific St Ste H, Rocklin, CA, 95677, United States.Shipping
We can ship to virtually any address in the world. International orders include brokerage fees for customs. Duties, VAT, taxes, and other fees may need to be collected prior to delivery. Every country and local is different so we cannot provide an exact estimate of these fees.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Choosing a selection results in a full page refresh.