Boss Laser Galvo Laser Marker Engraver Enclosure with Laser viewing Window (Universal Fit)

The Boss Laser Galvo Laser Marker Enclosure by Clearview Plastics is our heavy-duty, industrial-grade enclosure built to fit the Boss Laser — fiber galvo markers. It surrounds your marker in 1/4" aluminum composite panels with an OD6+ laser-safety viewing window rated for 1064 nm, contains the beam, glare, and fumes, and configures to your shop with the door, sealing, door sensor, and filtration options below.

Offered in multiple sizes so you can match the Boss or size up to your media, it's a "set-over" enclosure that assembles in 60 to 120 minutes and can ship flat-packed or delivered assembled.

Not sure on size, or running a UV marker instead? See our universal UV / Fiber Galvo Laser Marker Enclosure.

Real laser-light containment

Galvo fiber markers are Class 4 lasers: 1064 nm is an invisible infrared beam that reflects off the very metal you're marking. This enclosure is built for genuine beam containment, not just fume control:

• OD6+ viewing window (1064 nm) — an 11 × 11" laser-safety window (800–1100 nm, ~30% transmittance) so you can watch the job without the infrared reaching your eyes. (An OD6+ window is available if you run a 355 nm UV marker.)
• Aluminum composite panels — opaque, rigid, and beam-stopping; not clear acrylic.
• Door gasketing — seals the door perimeter to keep fumes in and block stray light leakage around the edges.

Contain the fumes and soot

• 4" exhaust adapter — connects a flexible 4" hose on the rear panel to vent outdoors or to a filter.
• Fan & venting options — add a 95 CFM or 200 CFM fan, or our window exhaust kit, for the extraction your workload needs.
• Donaldson AD350 filter — step up to a heavier-duty Donaldson AD350 filtration unit purpose-built for laser marking when venting outside isn't an option.
• Flow-control vents — slide-open vents on the front and sides tune airflow for better extraction.

Configure your enclosure

• Size — Medium, Large, XL, or XL+ (see Specifications) to match your machine and media.
• Viewing window — OD6+, green for fiber / MOPA (1064 nm) or amber for UV (355 nm).
• HD hardware upgrade — metal hinges, heavier binding-screw hardware, and metal door pulls.
• LightBurn hood camera — hood-mounted USB camera for accurate part alignment and LightBurn tracing.
• Additional side doors — with two side doors the enclosure doubles as a pass-through for oversized or long media.
• Additional seam sealing — extra sealing for tighter fume and light containment.
• Two-wire magnetic door sensor — a two-wire magnetic door sensor that reports door position to your machine's safety circuit. It senses the door; it does not hold it shut.
• Delivered assembled — have it shipped built and ready to use instead of flat-packed.

Specifications

• Fits: Boss Laser fiber galvo markers (1064 nm), plus other desktop fiber galvo markers — see sizing options
• Panels: 1/4" aluminum composite (white)
• Viewing window: 11 × 11" laser-safety acrylic — OD6+ green for 1064 nm fiber / MOPA (OD6+ amber UV option)
• Sizes (W × D × H): Medium 15.75 × 23.75 × 27.5" · Large 18 × 29.5 × 30.5" · XL 21.5 × 29.5 × 34" · XL+ 21.5 × 29.5 × 38.25"
• Exhaust: 4" adapter (rear); fan, window-kit, or Donaldson AD350 filtration options; slide flow-control vents
• Sealing: door gasketing standard; optional added seam sealing
• Options: HD hardware, LightBurn hood camera, additional side doors (pass-through), two-wire magnetic door sensor, assembled delivery
• Made in: Sacramento, California, USA

Why choose the Clearview Galvo Fiber enclosure

• Genuine laser-safety window — OD6+ for 1064 nm, not a clear hobby panel.
• Industrial-grade build — 1/4" aluminum composite panels with door gasketing.
• Contains beam, glare, and fumes — with exhaust and Donaldson AD350 filtration options.
• Configurable for real shops — sizes, side doors / pass-through, door sensor, seam sealing, and assembled delivery.
• US-made by a small business — CNC-cut in Sacramento with genuine, hands-on support.

About Clearview Plastics

Neil Henderson here, owner and head designer at Clearview Plastics. My shop is a California-based artisan design studio, and we build every enclosure in-house in Sacramento. Our panels are professionally CNC-cut for accuracy, with parts designed specifically for each machine we support — this isn't a generic box off a marketplace. When you order through us, you work directly with me, and that relationship comes with my genuine appreciation and skilled, personal help.

Frequently asked questions

Which window do I choose?
For this 1064 nm fiber / MOPA marker, choose the green OD6+ window. (An amber OD6+ window is offered for 355 nm UV markers.)

Does this reclassify my Class 4 laser to Class 1?
No. It contains the beam, glare, and fumes and dramatically reduces stray-light exposure, but it is not certified to reclassify your laser or meet ANSI standards. Always wear OD-rated safety glasses for your wavelength. Need a certified/Class 1 build? Contact us about our Worksafe enclosure.

What are the exhaust and filtration options?
A 4" exhaust adapter is included. Add a 95 CFM or 200 CFM fan or our window exhaust kit, or step up to a heavy-duty Donaldson AD350 laser-rated filtration unit for indoor operation.

Can it act as a pass-through for long media?
Yes — add the optional side doors; with two side doors the enclosure opens on both sides to pass long or large stock straight through.

Can I get it assembled?
Yes. Choose the delivered-assembled option; you can also add a two-wire magnetic door sensor and extra seam sealing.

What is your return policy?
30-day return policy. Unused, undamaged panels with masking fully attached are eligible for a full refund less return shipping. Damaged or unmasked panels are not refundable.