Trusted by engineers, scientists & manufacturers at
Lockheed Martin
Amazon
Apple
Meta
Samsung
MIT
Walt Disney Co.
Tesla
Toyota
Volkswagen
John Deere
Procter & Gamble
Home Depot
Corning
Hologic
Analog Devices
Molex
Red Hat
Cricut
Oak Ridge Nat'l Lab
Pacific Northwest Nat'l Lab
Jefferson Lab
MIT Lincoln Lab
NOAA
U.S. Air Force
U.S. Navy
U.S. Army
U.S. Marine Corps
Blue Origin
Sierra Nevada Corp.
Collins Aerospace
L3Harris
General Dynamics
Rolls-Royce
Kitty Hawk
BAE Systems
Booz Allen Hamilton
CACI
Northrop Grumman
Figure
GSK
Takeda
U. of Michigan
U. of Florida
Texas A&M
UT Austin
Northeastern
NC State
U. of Iowa
U. of Edinburgh
Lockheed Martin
Amazon
Apple
Meta
Samsung
MIT
Walt Disney Co.
Tesla
Toyota
Volkswagen
John Deere
Procter & Gamble
Home Depot
Corning
Hologic
Analog Devices
Molex
Red Hat
Cricut
Oak Ridge Nat'l Lab
Pacific Northwest Nat'l Lab
Jefferson Lab
MIT Lincoln Lab
NOAA
U.S. Air Force
U.S. Navy
U.S. Army
U.S. Marine Corps
Blue Origin
Sierra Nevada Corp.
Collins Aerospace
L3Harris
General Dynamics
Rolls-Royce
Kitty Hawk
BAE Systems
Booz Allen Hamilton
CACI
Northrop Grumman
Figure
GSK
Takeda
U. of Michigan
U. of Florida
Texas A&M
UT Austin
Northeastern
NC State
U. of Iowa
U. of Edinburgh
Description
xClearview Plastics · Creality Ender 3 V3 Neo entry-level Enclosure starter Kit
Cleaner workspace.
Healthier air.
Better prints.
Quieter printing.
The Ender 3 V3 Neo is a lot of people's first printer, and it's an open frame: no shell, no door, no filter. Drafts lift corners, dust lands on the bed, and the fumes and particulate off the nozzle go straight into whatever room it lives in, usually one the whole household shares.
This starter kit puts real acrylic panels around it. It's the same kit as our Bambu A1 entry-level starter: you get the panels and hardware, print the pre-sliced parts on the Neo itself with about one roll of filament, and assemble. It makes a good first project for a new printer, and it comes out looking like equipment, not a grow tent.
Ender 3 V3 Neo
220 × 220 × 220 mm build
Creality hasn't published the Neo's frame dimensions yet. Sized against the 220 mm Ender 3 V3 class, bed travel included.
Suggested enclosure
19.5″ W × 23.5″ D × 23.75″ H
495 × 597 × 603 mm. The same starter kit we build for the Bambu A1.
Minimum table top
21.5″ × 25.5″
Rated to 60 lb. Fits most desks and workbenches 24″ deep or more.
Coming soon · Sold out until the first kits ship. Tap Notify me to hear when it's live. Fit confirmed on the printer before kits ship.
Four reasons to enclose it
01 — CLEANER
A workspace that looks finished
Printer, spools and cables sit in one enclosed unit instead of spreading across a bench. Clear panels, cables routed through grommets, and doors that open where you work. It reads as professional equipment, in an office, a lab, or a room at home other people use.
02 — HEALTHIER
Fumes and particulate stay contained
Every filament gives off fumes and ultrafine particulate at some level, PLA included, and an open Ender 3 V3 Neo puts all of it straight into the room. The enclosure contains it, so a filter can reduce it or an exhaust run can carry it outside.
03 — BETTER PRINTS
Better prints, in more materials
Blocking drafts and holding a little heat is the difference between PLA that sticks and corners that lift, and it opens the door to PETG and ABS later. Keeping dust off the bed and out of the motion system keeps a new machine printing like a new machine.
04 — QUIETER
A room you can still work in
Panels on every side take the edge off fan and motion noise, so a long print doesn't take over the room. Add the vibration dampening feet to cut the ringing that travels through the bench.
And then you open the door
A sealed box with nothing moving the air just stores fumes until you open it, then releases them into the room all at once. That's why these enclosures aren't gasketed. The filter or exhaust keeps air moving through the enclosure the whole time, so the air inside is being treated, not saved up for the moment the door opens.
Who it's built for
Built for work where the result matters.
THE PARTS
When the prints matter
School projects, gifts, Etsy orders and first prototypes, where a failed print costs a night of waiting.
THE PEOPLE
When people share the air
Kids, roommates and family in the next room, or a classroom of students.
THE ROOM
When the room is shared
A bedroom, a home office or a classroom corner, where an open printer is noisy, dusty and in the way.
Fortune 500 companies, government labs and top universities run Clearview enclosures. So do physicians, attorneys, executives and senior engineers.
If the printer is going into a school, library or makerspace that answers to a safety review, the five-document FDM 3D Printer Safety Documentation Pack is written for exactly that conversation. See a sample first (PDF, no email required).
Creality Ender 3 V3 Neo entry-level Enclosure starter Kit
A low-cost, made-in-USA acrylic enclosure for the Creality Ender 3 V3 Neo. The kit ships with the panels and hardware; you print the pre-sliced parts with about one roll of filament and assemble. It's a great first project for a new printer, and a far cry from a floppy grow tent.
Photos are reference renders of this same starter kit on a Bambu Lab A1. The Neo kit is the same size and construction.
Size and fit
Suggested size: 19.5" W × 23.5" D × 23.75" H (495 × 597 × 603 mm). The Neo prints a 220 × 220 × 220 mm volume on a bed that travels front to back. Creality hasn't published the Neo's frame dimensions yet, so this size is based on the 220 mm Ender 3 V3 class and will be confirmed on the printer before kits ship. The CFS nano on the Neo Combo, and your spools, sit outside the enclosure and feed through the filament port.
Will it fit your table?
| Enclosure (W × D × H) | Min. table top (W × D) | Min. load rating |
|---|---|---|
| 19.5″ × 23.5″ × 23.75″ 495 × 597 × 603 mm |
21.5″ × 25.5″ | 60 lb |
- Fits most desks 24″ deep or more, with a little overhang at 24″.
- Leave a few inches behind for the power cable and a fan if you add one.
What's included
- Panels: 1/8" clear acrylic, with an optically clear front panel so you can watch the print. 5-sided design.
- Hardware: every screw, nut and connector you need.
- STL files: pre-sliced printed parts, ready to go. Pick your filament and print them on the Neo.
- No modifications: nothing on the printer gets drilled or changed.
- Room to grow: a port to feed filament from outside, a port for a fan, and space inside for a camera, filter or other mods later.
Assembly Instructions
Why enclose a first printer?
- Better prints: blocking drafts and holding a little heat stops warping and helps the first layer stick.
- Healthier space: fumes and particulate stay in the box instead of the room, and a filter or fan can deal with them.
- Quieter: panels on every side take the edge off fan and motor noise.
- Cleaner: dust stays off the bed and out of the motion system.
Shipping and lead time
Coming soon. Once fit is confirmed on the printer, kits ship flat-packed within our standard 10 business days.
CNC-routed in Rocklin, California by a small, owner-run shop. Every enclosure carries a 100% satisfaction guarantee and a 1-year warranty against manufacturer defects. Every printed part is in the file repository you get after ordering, including future add-ons and mods: if one breaks or gets revised, print a new one.
Who We've Worked With
Need more information on printing with enclosures? Check these links:
- Benefits of printing with an enclosure
- 3D printing health: NIOSH guidance
- Additional health studies
- Getting better prints with an enclosure
Questions
Does it work with the Ender 3 V3 Neo Combo?
Yes. The CFS nano and spools sit outside the enclosure and feed in through the filament port.
Can I upgrade it later?
The starter kit is built to be simple. If you want 1/4" panels, filters and the full option list from day one, look at our full Ender 3 V3 enclosure kits.
What is your return policy?
30 days. Unused, undamaged panels with the protective masking fully attached are eligible for a full refund, less return shipping. If panels are damaged after shipment or the masking has been removed, we can't offer a refund. To check fit and finish before you commit, assemble with the masking still on.
Why do the photos differ a little from each other?
We improve these kits continuously, and the renders are updated before the photos are. Function stays the same or gets better. For the clearest picture of the current version, go by the renders.
Shipping & Return
xReturns Policy
-Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange. -To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging. -We reserve the right to charge a 20% restock fee for parts that are no longer in new condition. These examples apply: Acrylic Panels that have had the protective mask peel off. Fans and filters that have been used before return. -Custom items are not available for return -Shipping charges from returning the item and charges for shipping the order out that were paid by Clearview will be deducted from the order's final refund. Additional non-returnable items: * Gift cards * Downloadable software products * Some health and personal care items To complete your return, we require a receipt or proof of purchase. Please do not send your purchase back to the manufacturer. There are certain situations where only partial refunds are granted: (if applicable) * Book with obvious signs of use * CD, DVD, VHS tape, software, video game, cassette tape, or vinyl record that has been opened. * Any item not in its original condition, is damaged or missing parts for reasons not due to our error. * Any item that is returned more than 30 days after delivery Refunds (if applicable) Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund. If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days. Late or missing refunds (if applicable) If you haven’t received a refund yet, first check your bank account again. Then contact your credit card company, it may take some time before your refund is officially posted. Next contact your bank. There is often some processing time before a refund is posted. If you’ve done all of this and you still have not received your refund yet, please contact us at contact@clearviewplastic.com. Sale items (if applicable) Only regular priced items may be refunded, unfortunately sale items cannot be refunded. Exchanges (if applicable) We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at contact@clearviewplastic.com and send your item to: 4235 Pacific St Ste H, Rocklin, CA, 95677, United States.Shipping
We can ship to virtually any address in the world. International orders include brokerage fees for customs. Duties, VAT, taxes, and other fees may need to be collected prior to delivery. Every country and local is different so we cannot provide an exact estimate of these fees.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Choosing a selection results in a full page refresh.