Monport GA 60W / 100W MOPA Fiber Laser Enclosure with OD7+ Viewing Window

The Monport GA MOPA Enclosure by Clearview Plastics is a heavy-duty safety and ventilation enclosure sized for the Monport GA 60W and GA 100W integrated autofocus MOPA fiber markers. The GA is the workhorse behind a huge number of US tumbler, dog-tag, and jewelry shops — and it runs open on the bench with nothing between a Class 4 infrared beam and the room.

This enclosure contains the beam, the glare, and the fume in one move. 1/4" aluminum composite panels, an OD7+ 1064 nm laser-safety viewing window so you can actually watch a color-marking pass, and a 4" exhaust port for the metal fume that MOPA marking throws off. It sets over the GA and assembles in about 20–30 minutes.

Marking a different machine, or want to compare configurations? See our universal UV / Fiber Galvo enclosure.

Built for the Monport GA MOPA

This enclosure is designed and sized around the following configurations:

• Monport GA 60W MOPA and GA 100W MOPA integrated autofocus markers
• Monport GA Q-switched fiber siblings sharing the same chassis
• Machine footprint approx. 14.8" W × 19.7" D × 25.6" H (375 × 500 × 650 mm), 70.5 lb
• Z column travel to 410 mm lens-to-table — account for this if you work at full column height
• 175 × 175 mm standard marking field

All four sizes are selectable in the configurator above: Medium 15.75 × 23.75 × 27.5" · Large 18 × 29.5 × 30.5" · XL 21.5 × 29.5 × 34" · XL+ 21.5 × 31 × 38.25" (W × D × H). Not sure? Send us your machine and the media you mark and we'll point you to the right size.

Real laser-light containment — the OD7+ window

Unlike a hobby box, this enclosure is built for genuine beam containment. MOPA and fiber galvo markers are Class 4 lasers: 1064 nm is an invisible infrared beam that reflects off the very metal you're marking, straight back into the room.

• OD7+ viewing window (1064 nm) — an 11 × 11" laser-safety window (800–1100 nm, ~30% transmittance) so you can watch a fiber / MOPA job without the infrared reaching your eyes.
• Aluminum composite panels — opaque, rigid, and beam-stopping; not clear acrylic.
• Door gasketing — seals the door perimeter to keep fumes in and block stray light leakage around the edges.

Contain the fumes and soot

• 4" exhaust adapter — connects a flexible 4" hose on the rear panel to vent outdoors or to a filter.
• Fan & venting options — add a 95 CFM or 200 CFM fan, or our window exhaust kit, for the extraction your workload needs.
• Donaldson AD350 filter — step up to a heavier-duty Donaldson AD350 filtration unit purpose-built for laser marking when venting outside isn't an option.
• Flow-control vents — slide-open vents on the front and sides tune airflow for better extraction.

Configure your enclosure

Build the enclosure to your shop with the options in the product configurator above:

• Size — Medium, Large, XL, or XL+ (see the size guide above and Specifications below).
• HD hardware upgrade — metal hinges, heavier binding-screw hardware, and metal door pulls.
• LightBurn hood camera — hood-mounted USB camera for accurate part alignment and LightBurn tracing.
• Additional side doors — add side-door access; with two side doors the enclosure doubles as a pass-through for oversized or long media.
• Additional seam sealing — extra sealing for tighter fume and light containment.
• Magnetic door interlock switch — a 2-wire interlock lead to tie into your machine's safety circuit.
• Delivered assembled — have it shipped built and ready to use instead of flat-packed.

Specifications

• Fits: Monport GA MOPA — see the fitment list above
• Panels: 1/4" aluminum composite (white)
• Viewing window: 11 × 11" laser-safety acrylic — OD7+ for 1064 nm fiber / MOPA
• Sizes (W × D × H): Medium 15.75 × 23.75 × 27.5" · Large 18 × 29.5 × 30.5" · XL 21.5 × 29.5 × 34" · XL+ 21.5 × 31 × 38.25"
• Recommended for this machine: Large
• Exhaust: 4" adapter (rear); fan, window-kit, or Donaldson AD350 filtration options; slide flow-control vents
• Sealing: door gasketing standard; optional added seam sealing
• Options: HD hardware, LightBurn hood camera, additional side doors (pass-through), magnetic door interlock (2-wire), assembled delivery
• Assembly: ~20–30 minutes with a Phillips screwdriver and 2.5 mm hex wrench; 3D-printed brackets (STL files included, or add pre-printed parts)
• Made in: Sacramento, California, USA

Why choose the Clearview Monport GA MOPA enclosure

• Genuine laser-safety window — OD7+ at 1064 nm, not a clear hobby panel.
• Industrial-grade build — 1/4" aluminum composite panels with door gasketing.
• Contains beam, glare, and fumes — with exhaust and Donaldson AD350 filtration options.
• Sized for your machine — a specific size recommendation for the Monport GA MOPA, not a guess.
• Configurable for real shops — side doors / pass-through, interlock, seam sealing, and assembled delivery.
• US-made by a small business — CNC-cut in Sacramento with genuine, hands-on support.

About Clearview Plastics

Neil Henderson here, owner and head designer at Clearview Plastics. My shop is a California-based artisan design studio, and we build every enclosure in-house in Sacramento. Our panels are professionally CNC-cut for accuracy, with parts designed specifically for each machine we support — this isn't a generic box off a marketplace. When you order through us, you work directly with me, and that relationship comes with my genuine appreciation and skilled, personal help.

Frequently asked questions

Which window do I need for the Monport GA MOPA?
The OD7+ window — it's rated for the 1064 nm infrared a fiber or MOPA source puts out. If you also run a 355 nm UV marker, we make an OD6+ UV window; tell us and we'll set it up.

Does this reclassify my Class 4 laser to Class 1?
No. This enclosure contains the beam, glare, and fumes and dramatically reduces stray-light exposure, but it is not certified to reclassify your laser or to meet ANSI standards. Always wear OD-rated safety glasses for your wavelength and follow Class 4 protocols. If you need a formally certified Class 1 solution, contact us about our Worksafe enclosure.

What are the exhaust and filtration options?
A 4" exhaust adapter is included to vent outside via a flexible hose. Add a 95 CFM or 200 CFM fan or our window exhaust kit, or step up to a heavy-duty Donaldson AD350 laser-rated filtration unit for indoor operation.

Can it act as a pass-through for long or oversized media?
Yes. Add the optional side doors — with two side doors, the enclosure opens on both sides so you can pass long or large stock straight through.

Can I get it assembled?
Yes. Choose the delivered-assembled option and it ships built and ready to use instead of flat-packed. You can also add a magnetic door interlock (2-wire lead) and extra seam sealing.

What if my machine doesn't measure the way you've listed it?
Send us your actual base width, depth, and standing height with the column at your normal working focus. We'll confirm the size before you order, and if nothing standard fits, we cut custom.

What is your return policy?
We offer a 30-day return policy. Unused, undamaged panels with the masking fully attached are eligible for a full refund less return shipping. If panels are damaged after shipment or the protective mask has been removed, we can't offer a refund.