Clearview Plastics · UV Laser Marker Engraver Enclosure with Laser filtering OD3+ Acrylic (Universal Fit)
An open UV galvo marker is a Class 4 laser at 355 nm. Stray UV light and reflections come off every part, and the photochemical marking process gives off fume and odor with every pass, all in the room with whoever is working nearby.
The Clearview enclosure surrounds the marker with OD3+ UV-filtering amber acrylic on every side, so the whole box is the filter and you can still watch the job from anywhere around it. It contains the fume so the exhaust can carry it outside or to a filter. It is manufactured and kitted at our workshop in California.
It is built to be the engineering control a workplace laser safety program asks for first under ANSI Z136.1 and the OSHA guidance that points to it: laser-filtering panels on every side, gasketed doors and a planned exhaust path. Side and top door options turn it into a pass-through for a flexible, fast workflow.
Four reasons to enclose it
UV markers are Class 4 lasers at 355 nm. Every panel of this enclosure is OD3+ UV-filtering amber acrylic, so there's no single viewing window to line up with. The whole box filters, and it stays transparent, so you watch from any side. Need a higher-rated view? The UV/Fiber galvo enclosure uses an OD6+ window.
UV marking breaks down plastics and coatings at the surface, and fume and odor come off with every pass. The enclosure contains it at the source, and the exhaust carries it outside or to a filter.
Marker, controller, fixtures and finished parts sit in one enclosed station instead of spread across a bench. Residue stays on panels you can wipe, and the setup reads as production equipment.
Drafts and dust change what the beam meets at the surface. Enclosed and vented, the field stays clean and consistent from the first part to the last, and less residue reaches the lens and the optics you invested in.
This enclosure does not reclassify your laser. A Class 4 machine stays Class 4, so OD-rated eyewear and your controlled-area procedures still apply. For a certified Class 1 solution, see the WorkSafe line.
Who it's built for
Serialized parts, client work and production runs, where every mark is part of the spec.
Staff at the next bench, students in a lab, or anyone who walks past while it runs.
A shop, lab or school that answers to a safety review.
Fortune 500 companies, government labs and top universities run Clearview enclosures. So do physicians, attorneys, executives and senior engineers.
If your practice or lab answers to a safety review, the five-document Safety Documentation Pack is written for exactly that conversation.
Documents
The paperwork a safety review asks for
A seven-page Product & Safety Overview written for a facilities or EHS reviewer: the hazard, the construction, what arrives, the air, a specification table, and exactly what this enclosure does and does not claim. And a sample of the five-document Safety Documentation Pack.
Download the Product & Safety Overview (PDF) See a sample of the Safety Doc Pack (PDF)
No email required · UV Laser (355 nm) Safety Documentation Pack
Most buyers come to this enclosure because of a workplace safety review. ANSI Z136.1, the consensus standard for safe use of lasers, and the OSHA Technical Manual (Section III, Chapter 6) that points to it, put engineering controls first: a protective enclosure around the beam, viewing through a filter rated for the wavelength, and local exhaust for laser-generated air contaminants. This enclosure is built to be that control in your laser safety program. It does not reclassify the laser and is not certified to ANSI Z136.1.
Every door is gasketed to help keep fume and particulate inside the chamber, where the exhaust can take it. The gasketing frame also blocks light: it sits behind the door seam and laps past it on both sides, with the gasket between frame and door, so light that reaches the gap lands on frame and gasket instead of passing straight through.
Add one or two side doors and a top door (Large and up). Each is the same framed, gasketed door as the front. Two side doors make a pass-through for long stock, and the top door takes tall parts and overhead loading, so parts move through the station in the direction the work already flows: an optimal, flexible and fast workflow.
Where you cannot duct outside, the Donaldson BOFA AD 350 is a fume extractor built for laser marking, coding and engraving. Donaldson BOFA rates it at up to 223 CFM (380 m³/hr at 96 mbar) with three-stage filtration: a DeepPleat pre-filter for coarse dust, a HEPA stage rated 99.995% at 0.3 micron for fine particulate, and activated carbon for gas and odor. It connects to the enclosure's 4" port through a 100 mm hose. A segmented, stay-put exhaust arm puts the intake a few inches from the mark and holds the position you set, so fume is taken where the plume starts.
The enclosure pairs with the UV / Fiber Galvo Laser Enclosure Table. The standard table has a 23.5 × 31.5" top at 32" tall and carries every enclosure size. The new double-width complete workstation has a 46 × 31.5" top, with room beside the enclosure for the AD 350, the computer and the parts waiting their turn. Both come as an open frame or with a storage cabinet, flat-packed or delivered assembled.
Two PDFs, no email required: the Product & Safety Overview, a seven-page summary written for a facilities or EHS reviewer, and a sample of the Safety Documentation Pack. The full pack for your laser is the UV Laser (355 nm) Safety Documentation Pack.
The UV Laser Marker Engraver Enclosure with OD3+ Laser-Filtering Acrylic by Clearview Plastics is a made-to-fit safety and ventilation enclosure for 355 nm UV galvo laser markers — machines like the ComMarker Omni 1. Its fully transparent OD3+ laser-filtering acrylic panels give you a clear view of your work from the front, back, sides, and top, while blocking 99.9%+ of stray UV light and containing the fumes.
This is a "set-over" enclosure that drops over your UV marker and controller, offered in multiple sizes so you can match your machine — or size up to the media you're marking. It assembles in 60 to 120 minutes with a screwdriver and hex wrench, and can be configured with the doors, sealing, door sensor, and filtration a professional shop needs (see "Configure your enclosure" below).
This enclosure is made to fit the popular desktop 355 nm UV markers, including:
Not sure on sizing? Send us your machine and the media you mark and we'll point you to the right size.
UV "cold" lasers mark without burning, but 355 nm is still a Class 4 hazard to eyes and skin, and the photochemical process gives off ozone and fine fume. This enclosure keeps the view open while cutting the danger:
Note: the OD3+ panels dramatically reduce stray-light exposure and are spectrometer tested. However they do not reclassify your Class 4 laser. Always wear OD-rated UV safety glasses while the laser is in use. If you need a higher-rated window (OD6+) or a formally certified build, see our heavy-duty UV / Fiber Galvo enclosure or contact us.
Build the enclosure to your shop with the options in the product configurator above:

Neil Henderson here, owner and head designer at Clearview Plastics. My shop is a California-based artisan design studio, and we build every enclosure in-house. Our panels are professionally CNC-cut for accuracy, with parts designed specifically for each machine we support — this isn't a generic box off a marketplace. When you order through us, you work directly with me, and that relationship comes with my genuine appreciation and skilled, personal help.
What does an OD3+ rating mean?
OD3+ means that if a laser beam hits the panel, less than 0.1% (one-thousandth) of the original power can get through — usually much less, since our panels are spectrometer-tested above OD3 across the relevant wavelengths. It reduces stray-beam intensity by 1,000× or more, making the panels safe for incidental viewing during normal operation. It is not a certified laser-viewing window and does not reclassify your laser.
Should I get this or the OD6+ heavy-duty enclosure?
This OD3+ acrylic enclosure gives you the clearest all-around visibility and is ideal for UV markers like the ComMarker Omni 1. If you want a higher-rated OD6+ UV window with aluminum-composite panels for a more industrial build, choose our UV / Fiber Galvo Laser Marker Enclosure instead.
What are the exhaust and filtration options?
A 4" exhaust adapter is included to vent outside via a flexible hose. Add a 95 CFM or 200 CFM fan or our window exhaust kit, or step up to the Donaldson BOFA AD 350 fume extractor for indoor operation: up to 223 CFM with pre-filter, HEPA and activated carbon stages, per the manufacturer. A segmented exhaust arm takes the fume at the mark.
Can it act as a pass-through for long or oversized media?
Yes. Add the optional side doors — with two side doors, the enclosure opens on both sides so you can pass long or large stock straight through. A top door is available on Large and up for tall parts and overhead loading.
Is there a table made for it?
Yes. The UV / Fiber Galvo Laser Enclosure Table comes as a standard table (23.5 × 31.5" top) or a double-width complete workstation (46 × 31.5" top) with room for the filter unit or a computer beside the enclosure.
Can I get it assembled?
Yes. Choose the delivered-assembled option and it ships built and ready to use instead of flat-packed. You can also add a two-wire magnetic door sensor and extra seam sealing.
What is your return policy?
We offer a 30-day return policy. Unused, undamaged panels with the masking fully attached are eligible for a full refund less return shipping. If panels are damaged after shipment or the protective mask has been removed, we can't offer a refund.
We can ship to virtually any address in the world. International orders include brokerage fees for customs. Duties, VAT, taxes, and other fees may need to be collected prior to delivery. Every country and local is different so we cannot provide an exact estimate of these fees.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.